V-Series Isolators

3

NVE Corporation

11409 Valley View Road, Eden Prairie, MN 55344-3617

Phone: (952) 829-9217

Fax: (952) 829-9189

www.IsoLoop.com

©NVE Corporation

Safety and Approvals

VDE 0884-10 (File Number 5016933-4880-0001; currently certified 600 VRMS Working Voltage; 1000VRMS pending)

• Working Voltage (VIORM) 1000 VRMS (1415 VPK); basic insulation; pollution degree 2

• Transient overvoltage (VIOTM) 6000 VPK

• Surge voltage (VIOSM) 10 kVPK

• Each part tested at 2387 VPK for 1 second, 5 pC partial discharge limit

• Samples tested at 6000 VPK for 60 sec.; then 2122 VPK for 10 sec. with 5 pC partial discharge limit

IEC 61010-1 (Edition 2; TUV Certificate Numbers N1502812; N1502812-101)

Reinforced Insulation; Pollution Degree II; Material Group III

Package

Working Voltage

Wide-body SOIC/True 8™

300 VRMS

UL 1577 (Component Recognition Program File Number E207481)

5000 V

RMS/7072 V

PK isolation voltage

Each part tested at 6000 VRMS (8486 VPK) for 1 second; each lot sample tested at 5000 VRMS (7072 VPK) for 1 minute

IEC 60601-1

IEC 60601 specifies isolator creepage for medical safety, and is also used for demanding non-medical applications. With 5000 V isolation

and true 8 millimeter creepage, V-Series Isolators allow IEC 60601-1 compliance for 120V and 220/240V applications. Compliance is

follows:

Insulation

Single

3.0

4.0

Double

6.0

8.0

Single

2000

2500

Double

3000

4000

Creepage (mm)

Dielectric strength

Working Voltage (VRMS)

125

250

Soldering Profile

Per JEDEC J-STD-020C, MSL 1