The Embedded I/O Company

TIP250

8 Mbytes Flash Memory

Application Information

The TIP250 is an IndustryPack

 compatible module that

offers an easy and reliable way to implement 8 Mbytes of

Flash memory. The TIP250 is ideal for holding application

code, operating system software or data.

Two AM29LV033 devices (32 Mbit, x 8 organized) are

used to provide 1 bank of 8 Mbytes (16 bit wide) Flash

memory which is divided into 64 sectors of 128 Kbytes

(16 bit wide).

Accesses to the TIP250 Flash memory occur within the IP

memory space. After power-on the TIP250 comes up in

read only mode. The IP I/O space holds the Flash Control

Register and the Interrupt Vector Register.

Software Support (TIP250-SW-xx) is available for different

operating systems.

Technical Information

 Interface according to IndustryPack specification

 Identification-PROM supports auto-configuration

 Single Size IndustryPack

 8 Mbytes of Flash Memory

 Organized in 1 bank of 8 Mbytes (16 bit wide), 64

sectors of 128 Kbytes (16 bit wide)

 Flash chip: 2 x AM29LV033, 90 ns, TSOP package

 Guaranteed min. erase and program cycle

endurance: 1.000.000 cycles

 Typical bank erase time: 45 s

 Typical sector erase time: 0.7 s

 Typical word programming time: 9 µs

 Typical bank programming time: 36 s

 Interrupt support on program / erase cycles

 Power requirements: +5V only, on board +3.3V

generation

 No connections to IP I/O connector

 Operating temperature -40°C to +85°C

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.1

2017-09-27

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com