The Embedded I/O Company

TCP213

CompactPCI Carrier for 2 IndustryPacks

®

Application Information

The TCP213 is a standard 3U CompactPCI carrier that

provides back I/O for up to two single-size or one double-

size IndustryPack (IP) modules. It is used to build

modular, flexible and cost effective I/O solutions for

applications

in

process

control,

medical

systems,

telecommunication and traffic control.

Access to all IP I/O lines is provided via J2. Status

indicators for IP access, +5V and +/-12V are provided in

the front panel.

The TCP213 can operate with 3.3V and 5.0V PCI I/O

signaling voltage.

All IP interrupt request lines are mapped to PCI INTA. For

fast interrupt source detection, the TCP213 provides a

special IP interrupt status register.

The IP power lines are fuse protected by self healing fuses

and RF filtered. The operating temperature range is -40°C

to +85°C.

The TCP213 complies with the PICMG 2.0 Revision 3.0

CompactPCI specification.

Technical Information

 3U 32 bit CompactPCI module conforming to PICMG

2.0 Rev 3.0

 PCI 2.2 compliant interface

 Board size: 160mm x 100mm

 PCI Interface : 33 MHz; 32 bit

 5V and 3.3V PCI I/O signaling voltage

 ANSI/VITA 4-1995 compliant interface to

IndustryPack modules

 IndustryPack slots: Two single-size or one

double-size

 8/32 MHz interface, no DMA

 8 MByte memory space per IP

 Routing of all IP Interrupts to PCI INTA, local

interrupt status register

 I/O access via J2

 Status LED’s

 ACK LED for each IP module

 +5V Power LED for each IP slot

 +12V and –12V Power LED

 Self Healing fuses and RF-filtering on all IP power

lines

 Operating temperature -40°C to +85°C

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.1

2017-08-17

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com