TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

09/2009

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com

The Embedded I/O Company

TCP212 CompactPCI Carrier for 2 IndustryPacks

®

Application Information

The TCP212 is a standard 3U CompactPCI carrier that

provides front I/O for up to two single-size or one double-

size IndustryPack (IP) modules used to build modular,

flexible and cost effective I/O solutions for applications in

process control, medical systems, telecommunication and

traffic control.

For

improved

EMI

protection,

two

50

pin

champ

connectors are mounted in the EMI front panel of the

TCP212 and provide access to all IP I/O lines. The champ

connectors are assembled with screw locks to achieve a

secure and reliable connection to the cable. Status

indicators for IP access, +5V and +/-12V are provided in

the front panel.

The TCP212 can operate with 3.3V and 5.0V PCI I/O

signaling voltage.

All IP interrupt request lines are mapped to PCI INTA. For

fast interrupt source detection, the TCP212 provides a

special IP interrupt status register.

The IP power lines are fuse protected by self healing fuses

and RF filtered. The operating temperature range is -40°C

to +85°C.

The TCP212 complies with the PICMG 2.0 Revision 3.0

CompactPCI specification.

For First-Time-Buyers the Engineering Documentation

TCP212-ED

is

recommended.

The

Engineering

Documentation includes TCP212-DOC, schematics and

data sheets of the TCP212.

Technical Information

Standard 3U 32 bit CompactPCI module conforming

to PICMG 2.0 Rev 3.0

PCI 2.2 compliant interface

Board size: 160mm x 100mm

PCI Interface: 33 MHz; 32 bit

5V and 3.3V PCI I/O signaling voltage

ANSI/VITA 4-1995 compliant interface to

IndustryPack modules

IndustryPack slots: Two single-size or one

double-size

8/32 MHz interface, no DMA

8 MByte memory space per IP

Routing of all IP Interrupts to PCI INTA, local

interrupt status register

I/O access: 50 pin Champ connector per IP, front

panel I/O

Status LED’s

ACK LED for each IP module

+5V Power LED for each IP slot

+12V and –12V Power LED

Self Healing fuses and RF-filtering on all IP power

lines

Operating temperature -40°C to +85°C