www.clare.com

4

CPC1301

R01

MECHANICAL DIMENSIONS

4-Pin DIP (“G” Suffix)

PIN #1

0.250 ± 0.005

(6.350 ± 0.127)

0.039

(0.991)

0.360 ± 0.020

(9.144 ± 0.508)

0.300 ± 0.010

(7.620 ± 0.250)

0.130 ± 0.002

(3.30 ± 0.050)

0.010

(0.254)

9° (ALL)

9° (ALL)

0.180 ± 0.005

(4.572 ± 0.127)

0.018 ± 0.003

(0.457 ± 0.076)

0.100 ± 0.005

(2.540 ± 0.127)

0.125

(3.175)

0.085

(2.159)

0.020

(0.508)

NOTES:

1. All dimensions are in inches (mm).

2. Package tolerance to be ±0.002 (0.05) unless otherwise specified.

3. Cavity surface to be matte finish, 21 - 24 inches charmille gauge.

4. Tolerance of package misalignment or mismatch to be ±0.002 (0.05).

5. General tolerances ± 0.002 (0.05) unless otherwise specified.

0.250 ± 0.005

(6.350 ± 0.127)

0.039

(0.991)

PIN #1

4-Pin Surface Mount (”GR” Suffix)

NOTES:

1. All dimensions are in inches (mm).

2. Package tolerance to be ± 0.002 (0.050) unless otherwise specifi

3. Cavity surface to be matte finish, 21-24 in. charmille gauge.

4. Tolerance of package misalignment or mismatch to be ± 0.002 (0

5. General tolerances ± 0.002 (0.050) unless otherwise specified.

0.010

(0.254)

0.130 ± 0.002

(3.300 ± 0.050)

0.137 ± 0.003

(3.480 ± 0.076)

0.025 ± 0.010

(0.635 ± 0.254

0.375

(9.525)

0.300 ± 0.010

(7.620 ± 0.254)

9°±1° (ALL)

0.180 ± 0.005

(4.572 ± 0.127)

0.004 MIN/0.010 MAX

(0.102 MIN/0.254 MAX

0.100 ± 0.005

(2.540 ± 0.127)

9° (ALL)

Manufacturing Information

Soldering

For proper assembly, the component must be

processed in accordance with the current revision

of IPC/JEDEC standard J-STD-020. Failure to

follow the recommended guidelines may cause

permanent damage to the device resulting in impaired

performance and/or a reduced lifetime expectancy.

Washing

Clare does not recommend ultrasonic cleaning or the

use of chlorinated solvents.

Dimensions:

inches

(mm)