DIMENSIONS in [ ] are millimeters

For reference only, consult Ashcroft for specific dimensional drawings

HOW TO ORDER S10 TEMPERATURE PROBES:

The ordering code is built by selecting the appropriate

configuration for the various sections of the ordering code.

The Insert nominal length LN is measured from base of the

head to the tip of the probe.

The lag extension length N is measured from the base of

the head to the center of the threads on the lag extension.

LN can be calculated by adding the lag extension length N

to the probe insertion length L.

The N length and the LN length are added to the end of

the ordering code in millimeters.

To convert inches to millimeters multiply by 25.4.

mm = inches x 25.4

d = Stem diameter

N = Lag Extension Length

L = Insertion Length

LN = Insert Nominal Length

LN = N + L

N

LN

d

L

Data Sheet

S10 RTD's & Thermocouples, Metric Connections

of 7

7

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2022 Ashcroft Inc. S10_RTD_ds_RevB_04-05-22

ashcroft.com

info@ashcroft.com

1.800.328.8258