Low-Voltage Reference

2

_______________________________________________________________________________________

ABSOLUTE MAXIMUM RATINGS

ELECTRICAL CHARACTERISTICS

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional

operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to

absolute maximum rating conditions for extended periods may affect device reliability.

Note 2: If circuit strays in excess of 200pF are anticipated, a 4.7µF shunt capacitor will ensure stability under all operating condi-

tions.

Reverse Voltage ..............................................................(Note 1)

Forward Current ..................................................................10mA

Reverse Current ..................................................................10mA

Power Dissipation.......Limited by Max Forward/Reverse Current

Storage Temperature Range .............................-65°C to +150°C

Operating Temperature Range

MAX8069CCZQ ...................................................0°C to +70°C

MAX8069ESA ...................................................-40°C to +85°C

Lead Temperature (soldering, 10s) .................................+300°C

Note 1: In normal use, the reverse voltage cannot exceed the reference voltage. However, when plugging units into a powered-up

test fixture, an instantaneous voltage equal to the compliance of the test circuit will be seen. This should not exceed 20V.

PARAMETER

CONDITIONS

MIN

TYP

MAX

UNITS

Output Voltage

1.20

1.22

1.25

V

MAX8069ESA

25

Output Voltage Temperature Coefficient

MAX8069CCZQ

50

ppm/°C

Output Voltage Change

15

20

mV

1

2

Reverse Dynamic Impedance

0.6

2

Ω

Forward Voltage Drop

0.6

1

V

RMS Noise Voltage

20

µV

Reverse Current Range

0.06

5.0

mA