ACEINNA MFC2030 v1.10

Page 4 of 8

CONFIDENTIAL

PACKAGE DRAWING

The ACEINNA MFC2000 series Mass Flow Meter is mounted in chemically inert filled PPSU housing (available in

other material, see “Order Information”). The physical dimensions, mounting information and pin layout are provided

below. A push-in tube fitting or a PPSU flange (manifold mounting) is provided on inlet and outlet sides of the module

for flow connection. For electrical connection, an 8-pin male header (FCI 69168-108HLF) is provided on the topside

of the module for I2C interface connection. The recommended mechanical/electrical connectors are shown as

follows. The unit can be printed circuit board mounted is needed.

Recommended Connector

Example

Flow Fitting

Push-in connector included

See “Ordering Information”

Electrical

8 pin crimp to wire housing

(2.54mm pitch, 2 rows, 2.54mm

row space)

FCI 65846-016LF

MFC2000 module mechanical dimensions (in mm).