STAC9202 datasheet(16/135 Pages) IDT

16 / 135 page

STAC9202

2-CHANNEL HIGH DEFINITION AUDIO CODEC WITH DUAL DIGITAL MICROPHONE INTERFACES

PC AUDIO

IDT™

2-CHANNEL HIGH DEFINITION AUDIO CODEC WITH DUAL DIGITAL MICROPHONE INTERFACES

STAC9202

V 1.1 102606

IDT CONFIDENTIAL

3. DETAILED DESCRIPTION

3.1.

SPDIF Input

SPDIF_IN can operate at 44.1 KHz, 48 KHz or 96 KHz and implements internal Jack Sensing. A

sophisticated digital PLL allows automatic rate detection and accurate data recovery. The ability to

accept consumer SPDIF voltage levels directly eliminates the need for costly external receiver ICs.

Advanced features such as record slot select and SPDIF_IN routing to the DAC allows for simulta-

neous record and play.

3.2.

SPDIF Output

SPDIF_OUT can operate at 44.1 KHz, 48 KHz, 88.2 KHz and 96 KHz as defined in the Intel High

Definition Audio Specification with resolutions up to 24 bits. This insures compatibility with all con-

sumer audio gear and allows for convenient integration into home theater systems and media center

PCs.

3.3.

Digital Microphone Support

The STAC9202 has a three-pin digital microphone interface that accepts high-rate, single-bit data

streams from two digital microphones. Each microphone requires only one data line, and both micro-

phones share a single clock line. This robust digital interface gives designers the flexibility to place

the microphones in the optimum physical location on a system (such as along the top of the screen

bezel) and use a simple, 3-wire ribbon cable to directly connect the microphones to the STAC9202

CODEC.

3.4.

Mono Out

The MONO Output is connected to pin 37 and has independent volume and mute control (see the

Widget listing for details). The MONO Output derives its input from the output of the summing node

that drives PORT A and PORT D. The following analog signals feed the summing amplifier that

feeds the MONO Out summing amplifier:

•

DAC Output: When enabled, both DAC Outputs are summed together.

•

Analog PC BEEP: Source from Pin 12

•

ADC Input: Stereo analog feed into the stereo ADC input.

The signals of the stereo channels from the DAC are combined into a single analog signal with a

-6dB degradation in signal strength.

3.5.

Headphone Drivers Restrictions

It is not recommended that users operate both Port A and Port D as headphone drivers simulta-

neously. The operation of the two ports as headphone drivers degrades the signal quality of both

outputs.1

Note: 1) Headphone capabilities are on Port A (pins 39/41) and Port D (pins 35/36). Do NOT put

headphone loads on both sets of pins at the same time.

STAC9202 датащи(PDF) 16 Page - Integrated Device Technology

STAC9202 датащи(HTML) 16 Page - Integrated Device Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL