Radiometrix Ltd
Control44
page 1
Features
•
Operating voltage (temperature):
3.0V-5.5V for standard version (-40
°C to +125°C)
2.0V-5.5V for low voltage version (-40
°C to +85°C)
•
Draws <2mA without external load
•
4 bit address and 4 bit data
•
16 different remotes with 4 controls each
•
Single packetised transmission for fast activation
•
Maximum usage of the range capability of an RF module
•
Adequate preamble to settle data slicer in the receiver.
•
Extra wake up preamble to allow for transmitter power up time requirements
•
Differential Manchester encoding of address, data and checksum
•
Synchronisation codes and checksum to reduce false triggering on noise
•
Suitable to be used with Narrow Band FM radio modules
•
Ceramic resonator or crystal oscillator up to 20MHz
•
Data rate up to 5.6kbps
•
Minimum external component requirement
•
4 wire, push button and latched push button modes
•
Custom address, data bit variations available subject to minimum order quantity
Applications
•
Security and Alarm systems
•
Emergency assistance call system
•
Status reporting and monitoring systems
•
RF Remote control systems
•
Industrial controls
•
HVAC controls
•
Simple On/Off switching
•
Long range telecontrol with Narrow Band FM radios
Radiometrix
Hartcran House, 231 Kenton Lane, Harrow, HA3 8RP, England
Issue: 4, 01 November 2004
Control44
Control44 is a 4 bit address, 4 bit data
encoder and decoder combined in a single IC.
This device can operate in either Encode or
Decode mode. It uses 1kbps differential
Manchester bit balancing with preamble and
checksum.CTR44 is specifically designed to
be used in RF remote control applications. It
is available in 20pin SSOP, 18pin SOIC and
PDIP packages.
Tel: +44 (0) 20 8909 9595, Fax: +44 (0) 20 8909 2233
4 bit Address - 4 bit Data encoder/decoder
Figure 1: Control44 in SO, DIL packages
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
