Data Sheet

ADRF5031

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

analog.com

Rev. 0 | 7 of 12

Figure 3. Pin Configuration (Top View)

Table 6. Pin Function Descriptions

Pin No.

Mnemonic

Description

1, 2, 4, 5, 6, 7, 9, 10, 13, 16, 17, 19, 20

GND

Ground. The GND pins must be connected to the RF and /DC ground of the PCB.

3

RFC

RF Common Port. The RFC pin is DC-coupled to 0 V. No DC-blocking capacitor is necessary

when the RF line potential is equal to 0 V DC. See Figure 4 for the interface schematic.

8

RF1

RF Port 1. The RF1 pin is DC-coupled to 0 V. No DC-blocking capacitor is necessary when the

RF line potential is equal to 0 V DC. See Figure 4 for the interface schematic.

11

VDD

Positive Supply Voltage. See Figure 6 for the interface schematic.

12

CTRL

Control Input Voltage. See Figure 5 for the interface schematic.

14

EN

Enable Input Voltage. See Table 7 for the truth table. See Figure 5 for the interface schematic.

15

VSS

Negative Supply Voltage. See Figure 7 for the interface schematic.

18

RF2

RF Port 2. The RF2 pin is DC-coupled to 0 V. No DC-blocking capacitor is necessary when the

RF line potential is equal to 0 V DC. See Figure 4 for the interface schematic

EPAD

Exposed Pad. The exposed pad must be connected to the RF and DC ground of the PCB.

INTERFACE SCHEMATICS

Figure 4. RFC, RF1, and RF2 Interface Schematic

Figure 5. EN and CTRL Interface Schematic

Figure 6. VDD Interface Schematic

Figure 7. VSS Interface Schematic