PIC18F258-ESLASHLSQTP datasheet(154/402 Pages) MICROCHIP

154 / 402 page

PIC18FXX8

DS41159E-page 152

17.4

I2C Mode

The MSSP module in I2C mode fully implements all

master and slave functions (including general call

support) and provides interrupts on Start and Stop bits

in hardware to determine a free bus (multi-master

function). The MSSP module implements the standard

mode specifications, as well as 7-bit and 10-bit

addressing.

Two pins are used for data transfer:

• Serial clock (SCL) – RC3/SCK/SCL

• Serial data (SDA) – RC4/SDI/SDA

The user must configure these pins as inputs or outputs

through the TRISC<4:3> bits.

FIGURE 17-7:

MSSP BLOCK DIAGRAM

(I2C™ MODE)

17.4.1

REGISTERS

The MSSP module has six registers for I2C operation.

These are:

• MSSP Control Register 1 (SSPCON1)

• MSSP Control Register 2 (SSPCON2)

• MSSP Status Register (SSPSTAT)

• Serial Receive/Transmit Buffer (SSPBUF)

• MSSP Shift Register (SSPSR) – Not directly

accessible

• MSSP Address Register (SSPADD)

SSPCON1, SSPCON2 and SSPSTAT are the control

and status registers in I2C mode operation. The

SSPCON1 and SSPCON2 registers are readable and

writable. The lower 6 bits of the SSPSTAT are read-only.

The upper two bits of the SSPSTAT are read/write.

SSPSR is the shift register used for shifting data in or

out. SSPBUF is the buffer register to which data bytes

are written to or read from.

SSPADD register holds the slave device address

when the SSP is configured in I2C Slave mode. When

the SSP is configured in Master mode, the lower

seven bits of SSPADD act as the Baud Rate

Generator reload value.

In receive operations, SSPSR and SSPBUF together

create a double-buffered receiver. When SSPSR

receives a complete byte, it is transferred to SSPBUF

and the SSPIF interrupt is set.

During transmission, the SSPBUF is not double-

buffered. A write to SSPBUF will write to both SSPBUF

and SSPSR.

Read

Write

SSPSR reg

Match Detect

SSPADD reg

Start and

Stop bit Detect

SSPBUF reg

Internal

Data Bus

Addr Match

Set, Reset

S, P bits

(SSPSTAT reg)

RC3/SCK/

RC4/

Shift

Clock

MSb

SDI/

LSb

SDA

SCL

PIC18F258-E/LSQTP датащи(PDF) 154 Page - Microchip Technology

PIC18F258-E/LSQTP датащи(HTML) 154 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL