TEA1069 datasheet(27/44 Pages) PHILIPS

27 / 44 page

1998 Jan 08

Philips Semiconductors

Product speciﬁcation

Versatile speech/dialler/ringer with

music-on-hold

TEA1069; TEA1069A

accepted for last number redial. If this maximum is

reached the redial function is inhibited. During LNR

programmed access pauses are also dialled.

The [RECALL] key and the (in pulse dialling mode

allowed) tone switch key [

∗/T] are also stored in LNR

memory.

• Notepad function.

In conversation state it is possible to store a number into

the LNR register, which may be dialled after an

on-hook/off-hook action. The procedure is as follows:

– press [STORE]

– press to-be-stored sequence of the digits [0] to [9],

[PAUSE/LNR], [

∗/T] or [RECALL]

– press [STORE]

– press [PAUSE/LNR].

Memory recall state

Repertory numbers can be dialled-out after or before

entering manual dialling, last number redial and by

entering the memory locations in successive order.

The stored numbers can be dialled by the following

procedures:

• Press [MRC]

• Press one of the numeric keys [0] to [9], corresponding

to the memory location

• Press one of the direct memory keys ([M1] to [M10]).

Program state

The program mode can be entered from the conversation

(on-line) mode.

Pressing the [STORE] key in this state puts the TEA1069

and TEA1069A in the program mode. The program state

can be left by going on-hook (by putting the handset on the

cradle or pressing the [HOOK] key), the program mode is

interrupted and nothing is stored, or by ending the store

procedures resulting in a proper store of the programmed

item.

• Programming repertory numbers.

Storing of a new repertory number including access

pauses, tone switch and register recall can be done by

the following procedures:

– press [STORE]

– press to-be-stored sequence of the digits [0] to [9],

[PAUSE/LNR], [

∗/T] or [RECALL]

– press [MRC]

– press one of the numeric keys [0] to [9],

corresponding to the memory location

– press [STORE]

– press to-be-stored sequence of the digits [0] to [9],

[PAUSE/LNR], [

∗/T] or [RECALL]

– press [M1] to [M10].

For storing the redial number in repertory use:

– press [STORE]

– press [PAUSE/LNR]

– press [MRC]

– press one of the numeric keys [0] to [9],

corresponding to the memory location

– press [STORE]

– press [PAUSE/LNR]

– press [M1] to [M10].

If the keyboard described in Fig.17 is selected by the

KBS diode option, repertory memory place

[M1] = [MRC] + [1] to [M10] = [MRC] + [0], thus the set

has 10 repertory numbers which can be selected via two

different ways.

If the keyboard described in Fig.19 is selected by the

KBS diode option repertory memory place

[MRC] + [0] to [MRC] + [9] and [M1], [M2] and [M3] are

different repertory numbers, thus this set has in total

13 repertory numbers.

• Memory overflow.

A maximum of 224 digits can be stored in the repertory

memories. When the maximum is reached, no keytone

is generated when trying to store more digits. The store

procedure is cancelled automatically.

• Clear repertory number.

Clearing a memory location is possible via the same

procedure as for storing a number, except no telephone

number is entered, thus one of the following sequences

must be used:

– press [STORE]

– press [MRC]

– press one of the numeric keys [0] to [9],

corresponding to the memory location

– press [STORE]

– press [M1] to [M10].

TEA1069 датащи(PDF) 27 Page - NXP Semiconductors

TEA1069 датащи(HTML) 27 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

датащи скачать

ссылки URL