AMIS-710200:200dpi CIS Module

Data Sheet

Figure 2: AMIS-710200 Cross Section

4.0 Pin Out Description

There is one connector located at the end of the module. The outline of the module in Figure 4 of the mechanical section illustrates the

connector location. With the module window facing down on flat surface, the viewer looking down on backside of the module and with

the connector's pins facing the viewer, the connector is located on the left hand end of the module. The connector is a 2.0mm dual 8-

pin row with a total of 16 pin connector, part # Berg 88054-X16. Its I/O designation is provided in Table 1. Pin number 1’s location is

indicated on the module outline. All of the odd pins are on the bottom row with Pin 1 on the edge closest to the end of the module. All

of the even pins are on the top row with Pin 2 located adjacent to Pin 1.

Table 1:I/O Designation

Pin Number

Symbol

Names and Functions

1, 2 , 4, & 8

Gnd

Ground; 0V

3

Vout

Analog video output

5 & 6

Vdd (+5V)

Positive power supply

7

SP

Start clock pulse

9 & 10

Vn (-5V to –12V)

Negative power supply

11 & 12

CP

Sampling clock pulse

13 & 14

GLED

Ground for the light source; 0V

15 & 16

VLED

Supply for the light source

3

AMI Semiconductor – May 06, M-8-001

www.amis.com