PLL602-00

Multiplier XO IC Die for 12 to 25MHz Parallel Resonant Crystals

47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/03/04 Page 4

PAD ASSIGNMENT

Pad #

Name

X (

µm)

Y (

µm)

Description

7

GND

1042

109

Ground.

10

GND

1400

259

Ground.

13

CLK

1400

716

CMOS clock output.

18

S2

1232

1365

Used to select multiplication factor and drive level. Internal pull

down.

19

S1

1042

1365

Used to select multiplication factor and drive level. Internal pull

down.

20

S0

854

1365

Used to select multiplication factor and drive level. Internal pull

down.

21

VDD

659

1365

3.3V power supply.

23

VDD

459

1365

3.3V power supply.

25

OE

194

1365

Used to enable/disable the output(s). Internal pull up.

27

XIN

109

1017

Crystal input. See crystal specification page 3.

29

XOUT

109

646

Crystal output. See crystal specification page 3.

ORDERING INFORMATION

PhaseLink Corporation, reserves the right to make changes in its products or specifications, or both at any time without notice. The information

furnished by Phaselink is believed to be accurate and reliable. However, PhaseLink makes no guarantee or warranty concerning the accuracy of said

information and shall not be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product.

LIFE SUPPORT POLICY: PhaseLink’s products are not authorized for use as critical components in life support devices or systems

without the express written approval of the President of PhaseLink Corporation.

For part ordering, please contact our Sales Department:

47745 Fremont Blvd., Fremont, CA 94538, USA

Tel: (510) 492-0990 Fax: (510) 492-0991

PART NUMBER

The order number for this device is a combination of the following:

Device number, Package type and Operating temperature range

PLL602-00 D C

Order Number

Marking

Package Option

PLL602-00DC

P602-00DC

Die – Waffle Pack

PART NUMBER

TEMPERATURE

C=COMMERCIAL

I=INDUSTRAL

PACKAGE TYPE

D=DIE