FGF2 datasheet(27/52 Pages) ETC

27 / 52 page

SECTION 9

SECTION 1

General PurPose enclosed

Data subject to change without notice.

Features and Benefits

•

molded terminal blocks for primary and secondary connections up to 3000 VA or 30 amps; coil face

termination over 3000VA or 30 amps

•

All terminal blocks utilize a combination slot/Phillips #6 screw with a SEmS washer (suitable for 18 AWG

to 14 AWG for solid wire and 18 AWG to 12 AWG for stranded wire). Coil face terminations utilize a

¼ - 20 UnC X 0.50” combination slot/Phillips screw and a spring lock washer

•

Vacuum Impregnated with Polyester resin and oven cured

•

Bolted core construction

•

Bolt-on mounting brackets

•

Coils with high dielectric strength insulation

•

Seismically certified in accordance with 2009 IBC for S

DS <= 2.00g, z/h = 1.0 and IP = 1.5

•

CSA Certified, UL Listed, CE Marked and RoHS compliant

•

meets nEmA standards

•

Superior insulating materials. The HPS Fusion series transformers offer the following insulation

systems:

Up to 1500 VA:

95°C temperature rise, 130°C insulation class (B)

2000 VA to 5000 VA:

130°C temperature rise, 180°C insulation class (F)

(note: Temperature rise based on 25°C ambient)

•

50/60 Hz (60 Hz on FS***ACP and FS***Ar)

•

rugged nEmA 1 enclosure

•

Finish - forest green powder coat

•

Primary and secondary ground screw

•

Four (0.88”) wiring knockouts and four (0.50”) accessory knockouts

•

Optional panel mount fuse holder available

•

Easy mounting and installation via four mounting slots and two keyhole slots

•

Easy access to primary and secondary wiring compartments through removable covers

•

15 year warranty

FGF2 датащи(PDF) 27 Page - List of Unclassifed Manufacturers

FGF2 датащи(HTML) 27 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

датащи скачать

ссылки URL