MP8103

Dual Ultra Low Power

1.8V, 600kHz Op Amp

MP8103 Rev. 0.9

www.MonolithicPower.com

1

8/9/2006

MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.

© 2006 MPS. All Rights Reserved.

The Future of Analog IC Technology

TM

TM

DESCRIPTION

The MP8103 is a single supply, dual rail-to-rail

output operational amplifier. This amplifier

provides 600KHz bandwidth while consuming

an incredibly low 14µA of supply current. The

MP8103 can operate with a single supply

voltage as low as 1.8V. The input common

mode can go below the negative rail. The

maximum supply voltage is 5.5V which allows

the device to operate from ±0.9V to ±2.75V or a

single supply. The MP8103 is available in an 8-

pin 3mm x 5mm MSOP package.

FEATURES

• Single Supply Operation: 1.8V to 5.5V

• 600KHz –3dB Bandwidth

• 14µA Supply Current

• Rail-to-Rail Output

• Unity-Gain Stable

• Input Common Mode to Ground

• Drives Up to 1000pF of Capacitive Loads

• High Slew Rate: 0.1V/µs

• Available in a MSOP8 Package

APPLICATIONS

• Portable Equipment

• PDAs

• Pagers

• Cordless Phones

• Handheld GPS

• Consumer Electronics

• Smoke Detector

• Portable Medical Equipment

“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of

Monolithic Power Systems, Inc.

TYPICAL APPLICATION

--

+

V+

V+ = 1.8V-5.5V

1/2 MP8103