Feature

Value

Note on operating voltage range DC

0 - 30 V for UL applications

Operating voltage range AC

0 V ... 48 V

Note on operating voltage range AC

0 - 30 V for UL applications

Current rating at 40° C

4 A

Surge resistance

1.5 kV

Cable length

1 m

Cable characteristic

Suitable for energy chains/robot applications

abrasion-resistant

low adhesion

Flame-retardant and self-extinguishing

Connector cable test conditions

Test conditions on request

Torsional resistance: > 300 000 cycles, ±270°/0.1 m

Bending fatigue strength: > 50000 cycles, bending radius 5 mm

Energy chain > 5 million cycles, bending radius 28 mm

Note on connector cable test conditions

tested at 23 °C

Bending radius, fixed cable installation

≥12 mm

Bending radius, flexible cable installation

≥39 mm

Cable diameter

3.8 mm

Cable design

3 x 0.25 mm²

Nominal conductor cross section

0.25 mm²

Wire ends

Stripped

Cut off bluntly

Degree of protection

IP65

IP68

IP69K

Note on degree of protection

In mounted state

Special features

UV-resistant

hydrolysis resistant

Resistant to cooling lubricants

Resistant to microbes

Oil-resistant

Ozone-resistant

Use in exterior area

Locations of use with direct outdoor climatic exposure Class D1 based

on IEC 60654-1

Ambient temperature

-40 °C ... 85 °C

Note on ambient temperature

-40 - 50 °C for UL applications

Note derating

Ambient temperature with flexible cable installation

-20 °C ... 85 °C

Note on ambient temperature with flexible cable installation

-20 - 50 °C for UL applications

Storage temperature

-25 °C ... 55 °C

Note on storage temperature

short-term for transport in packaging -40 ... 85 °C

Relative air humidity

Max. 93% at 40 °C

Nominal altitude of use above sea level

<= 2000 m NHN

Overvoltage category

II

CE marking (see declaration of conformity)

As per EU RoHS directive

UKCA marking (see declaration of conformity)

To UK RoHS instructions

LABS (PWIS) conformity

VDMA24364-B2-L

Suitability for the production of Li-ion batteries

Metals with more than 1% by mass of copper, zinc or nickel by mass

are excluded from use. Exceptions are nickel in steel, chemically nickel-

plated surfaces, printed circuit boards, cables, electrical plug connectors

and coils

Cleanroom class

Class 4 according to ISO 14644-1

Note on materials

CFC-free

RoHS-compliant

Cadmium-free

Halogen-free

Free of phosphoric acid ester

Contamination level

3

Corrosion resistance class (CRC)

1 - Low corrosion stress

4/29/24 - Subject to change - Festo SE & Co. KG

2/3