Rev: b
Low power Bluetooth
™ Module with antenna- F2M03GLA
Datasheet
Software / Hardware Reboot
This option gives the ability to be able to reboot the module via software commands.
Inquiry
Search for other Bluetooth devices in the neighborhood.
There are three configuration parameters:
•
How many seconds the search should be active
•
A filter, used when searching for devices of as certain class
•
The possibility to include the Bluetooth name of the discovered devices
Pairing
When authentication is enabled, the devices must be paired before a successful connection can be
established.
The Wireless UART firmware can either initiate pairing with a remote device or accept pairing requests.
During a pairing PIN codes are exchanged between the local and remote device. A successful pairing
requires identical PIN codes. The result of the pairing attempt will be returned to the Host. If pairing was
successful, a unique link key has been generated and saved in non-volatile memory. The link key is used in
the connection establishment procedure for secure verification of the relationship between the paired
devices.
The Wireless UART firmware allows the user to be paired with one device at a time. The last pin code
entered and link key generated are saved.
Advanced configuration
Includes among others commands for enabling power save modes, fine tune performance, enabling
modem emulation and changing transmit power.
SCO commands
Makes it possible to establish full duplex audio connections between two WU units.
© 2006 Free2move AB
Page 13(44)
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
