| поискавой системы для электроныых деталей |
|
TMD37253 датащи(PDF) 7 Page - OSRAM GmbH |
|
|
|||||||||||||||||||||||||||||
TMD37253 датащи(HTML) 7 Page - OSRAM GmbH |
|
7 / 56 page ![]() Page 6 Datasheet, Public Document Feedback [v2-00] 2023-Mar-21 TMD3725 − Electrical Characteristics All limits are guaranteed. The parameters with min and max values are guaranteed with production tests or SQC (Statistical Quality Control) methods. Figure 6: Recommended Operating Conditions Note(s): 1. The minimum required supply voltage on the LED anode (VLEDA) is the sum of the LED's VF and the voltage drop from the LDR pin to PGND pin. The minimum required VLEDA can be lowered to 2.8V if the LED's forward current does not exceed 102mA (PLDRIVE value of 16 or less). 2. While the device is operational across the temperature range, performance will vary with temperature. Operational characteristics are at 25°C, unless otherwise noted. Figure 7: Operating Characteristics, VDD = 1.8V, TA = 25°C (unless otherwise noted) Note(s): 1. Values are shown at the VDD pin and do not include current through the IR LED. 2. This parameter indicates the supply current during periods of ALS integration. If Wait is enabled (WEN=1), the supply current is lower during the Wait period. 3. Idle state occurs when PON=1 and all functions are not enabled. 4. Sleep state occurs when PON = 0 and I²C bus is idle. If Sleep state has been entered as the result of operational flow, SAI = 1, PON will remain high. Symbol Parameter Conditions Min Typ Max Unit VDD Supply voltage 1.7 1.8 2.0 V VLEDA Supply voltage to LED anode (1) 3.0 3.3 3.6 V TA Operating free-air temperature (2) -30 85 °C Symbol Parameter Conditions Min Typ Max Unit fOSC Oscillator frequency 8.107 MHz IDD Supply current (1) Active ALS State (PON=AEN=1, PEN=0) (2) 50 90 150 μA Idle State (PON=1, AEN=PEN=0) (3) 30 60 Sleep State (4) 0.7 5.0 VOL INT, SDA output low voltage 6mA sink current 0.6 V ILEAK Leakage current, SDA, SCL, INT -5 5 μA VIH SCL, SDA input high voltage 1.26 3.3 V VIL SCL, SDA input low voltage 0 0.54 V TActive Time from power-on to ready to receive I²C commands 1.5 ms Electrical Characteristics |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |