CONTACT US

651-653-7000

800-553-6418

InverterInfo@sensata.com

Power Conversion

www.magnum-dimensions.com

Page 3

Rev: 07/20/19 Part#64-0200 vK

Copyright © 2019 Sensata Technologies, Inc.

Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that

incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible

for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have

been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that

specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements,

improvements and other changes to its data sheets or components without notice.

Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO

OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND

NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS

ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE

OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS

ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET

ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD

TO SENSATA DATA SHEETS OR USE THEREOF.

All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY

FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY

RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS,

AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION

OR SUPPORT THAT MAY BE PROVIDED BY SENSATA.

Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA.

www.sensata.com

GENERAL FEATURES AND CAPABILITIES

Transfer relay capability

30 ACC max. each input (30AC total on MS2000 models, 60ACC total on all other models)*

Five stage charging capability

Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™

Battery temperature compensation

Standard with available temp sensor connected (battery temp 0-50° C)

Internal cooling

0 to 120 cfm variable speed drive using dual 92mm brushless DC fans

Overcurrent protection

Yes, with two overlapping circuits

Overtemperature protection

Yes on transformer, MOSFETS, and battery

Corrosion protection

Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners

Branch-rated output circuit breakers

Optional on the MS2000 (15 or 20 amp breakers), MS2012 (15 or 20 amp breakers) or

MS4048 (20amp breakers)

Warranty

Three years parts and labor

PHYSICAL SPECIFICATIONS

Dimensions (l x w x h)

13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm) [Height on MS2000: 7.0”/17.8 cm]

Mounting

Shelf or wall (vents not allowed to face downward unless ME-CB or MMP/MP is installed

Unit weight

42 lb (19.1 kg)

55 lb (24.9 kg)

41 lb (18.6 kg)

55 lb (24.9 kg)

55 lb (24.9 kg)

Shipping weight

48 lb (21.8 kg)

62 lb (28.1 kg)

49 lb (22.2 kg)

62 lb (28.1 kg)

62 lb (28.1 kg)

Max operating altitude

15,000’ (4570 m)

15,000’ (4570 m)

15,000’ (4570 m)

15,000’ (4570 m)

15,000’ (4570 m)

Temperature (Operating/Non-operating)

-20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F)

Operating humidity

0 to 95% RH non-condensing

AGENCY APPROVALS & CERTIFICATIONS

• ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard**

• The MS2000, MS2012, MS2812, MS4024 and MS4048 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use.

• The MS2012, MS2812, MS4024 and MS4048 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations.

• All models also meet KKK-A-1822E standards for emergency vehicle use.**

*The pass-thru capability on each leg of the -15B and -20B models is limited by the output breaker size on each output.

**MS2000: ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01, meets KKK-A-1822E standard

Testing for specifications at 25° C.

Specifications subject to change without notice.

GENERAL NOTES