Type SE35 + S077

19 | 20

Visit product website 

10.2. Recommendation regarding product selection

A complete flowmeter Type SE35 + S077 consists of a flow transmitter Type SE35 and an Inline sensor-fitting Type S077.

See data sheet Type S077  for more information.

Two different components must be ordered in order to select a complete device. The following information is required:

• Article no. of the compact Type SE35 flow transmitter or batch controller (see chapter “10.4. Ordering chart” on page 19)

• Article no. of the selected Type S077 Inline sensor-fitting (see data sheet Type S077 )

10.3. Bürkert product filter

Bürkert product filter – Get quickly to the right product

You want to select products comfortably based on your technical requirements?

Use the Bürkert product filter and find suitable articles for your application quickly and easily.

Try out our product filter

10.4. Ordering chart

Flowmeter

Note:

The following variants have at least 2 volume totalizers.

Operating

voltage

Sensor

variant

Output

UL approval

Electrical connection

Article no.

Flow transmitter Type SE35 with standard output signal

12…36 V DC

Hall

4…20 mA (2 wires) + Pulse

—

Female cable plug

DIN EN 175301-803

444005 

UL Recognized

570477 

—

2 cable glands

444006 

UL Recognized

2 cable glands

553432 

Hall

4…20 mA (3 wires) + Pulse + 2 relays

—

2 cable glands

444007 

UL Recognized

2 cable glands

553433 

115/230 V AC

Hall

4…20 mA (2 wires) + Pulse

—

2 cable glands

423922 

Hall

4…20 mA (3 wires) + Pulse + 2 relays

—

2 cable glands

423924 

Batch controller

Note:

The following variants have at least 2 volume or mass totalizers and 2 totalizers of the number of dosing performed.

Operating

voltage

Sensor

variant

Input

Output

UL approval

Electrical connection

Article no.

12…36 V DC

Hall

4 digital inputs

(DI1…DI4)

2 transistor outputs (DO1

and DO4) + 2 relay

outputs (DO2 and DO3)

–

2 cable glands

443360 

UL Recognized

564398 

115/230 V AC

–

423926 