Mechanical characteristics

Shaft mechanical angle limits

± 18˚

Base mechanical life

Single axis with friction = 1 million full operating cycles

Single axis and dual axis with spring return = 2.0 million full operating cycles

Dual axis with spring in one axis, friction in one axis = 1 million full operating cycles

Maximum force on handle

1000 N

Maximum torque

15 Nm

Base only mass

0.75 kg (1.65 lbf)

Weight (base without grip)

725 G (1.8 lb)

Vertical maximum load

2500 N (560 lbs)

Electrical—PVE (Standard and Extended) characteristics

Supply voltages

UDC

9 to 36 VDC

Maximum current consumption

8 A

Current consumption, no load

150 mA

Maximum load for push buttons and directional switches for all proportional functions

0.6 A

Neutral position switch

3 A

Sensor type

Hall effect with redundant sensors

Potentiometer

Signal voltage US

Minimum to maximum

0.25 to 0.75

Neutral position

0.50

Signal load in neutral position

Load type

PVE

Other

Load impedance

>6 kΩ

>15 kΩ

Signal current at maximum movement

UDC = 12 V

6 kΩ

15 kΩ

± 0.6 mA

0.2 to 0.6 mA

UDC= 24 V

± 1.2 mA

0.4 to 1.2 mA

Signal current in neutral position

UDC = 12 V

± 0 mA

± 0.4 mA

UDC = 24 V

± 0 mA

± 0.8 mA

Inverter

Non inverted

Output signal = Us

Inverted

Output signal = -1 x (Us -0.5 x U+) + 0.5 x U

+

Electrical—PVE (Extended only) characteristics

Signal regulation Us

Us Minimum (50%)

0.37 to 0.63 at 100% movement

U+ Maximum (200%)

0.25 to 0.75 at 50% movement

Dead band compensation

Us Minimum

0.00

U+ Maximum

0.06

Electrical—Analog Cat 1, Cat 3 characteristics

Sensor type

Hall effect with redundant sensors

Supply voltage (Vs)

4.5 to 5.5 VDC

Output

10 to 90% of input voltage

Output impedance

1 mA max output current at 200 Ohm output impedance

Digital outputs

Vs-0.3 VDC, maximum current 100 mA

Data Sheet

JS1 Heavy Duty Joysticks

© Danfoss | March 2019

AI00000239en-000901 | 3