Environmental Meter (Badge Type) PCE-MND 10

Environmental meter (badge type) according to IEC 61252:2002 / Measuring range 70 ... 140 dB / Crocodile clips / For use in

occupational safety / Battery life >15 hours / USB interface / Key lock / Frequency weighting A, B and Z / Optional with ISO

calibration certificate

The environmental meter (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC

61252:2002 standard. With a measuring range of 70 … 140 dB and a frequency weighting of A, B and Z, the noise dose meter is ideal for this.

The time weighting on the noise dose meter can be selected between fast, slow and impulse. With the built-in 470 mAh battery, the noise dose

meter has a runtime of >15 hours.

Up to three virtual noise dose meters can be set in an environmental meter (badge type). This has the advantage that up to three measurement

standards can measure simultaneously. The display of the noise dose meter shows up to 14 measurement windows that can be set individually.

The data transfer from the environmental meter (badge type) to a PC takes place directly via the charging station. The recorded measurement

data can be read out and analyzed with the software for the noise dose meter. In addition, all settings for the noise dose meter can be made

via the software. Another special feature of the noise dose meter is that the charging stations can be coupled with each other. This has the

advantage that several noise dose meters can be charged via one power pack. Up to four noise dose meters can be charged simultaneously

per power supply.

For optimal support and positioning, the environmental meter (badge type) is attached to the work clothing of the respective employee with

two crocodile clips. The distance between hearing and the noise dose meter should be between 10 and 15 cm (3.9 and 5.9").

Frequency weighting A, B and Z

Battery life of >15 hours

Software for setting the parameters

Measuring range 70 ... 140 dB

IEC 61252:2002, ANSI S1.25-1991

Optional with ISO calibration certificate