99

Humlog 20

v2.7 / Modification rights reserved

www.epluse.com

With SmartGraph3 the gathering of measured data is simple and as

intuitive as possible:

• A Humlog 20 data logger is automatically recognized and added as

a “network device”.

• In addition to its data-readout function, the software possesses a

recording mode that enables parallel recording to be displayed on

the computer.

• The data from any desired number of Humlog 20 devices can be

read out simultaneously.

• The zoom function allows for quick analyses of critical time periods.

• The export of measured data in csv format enables further

processing in EXCEL.

• The device configuration can be printed out in order to check

installation parameters.

• Alarm limits - like the measured data - are chronologically managed

at various times so that when changes in alarm limits occur, they

can be retracted.

• Automatic data readout of all measured data is supported.

Humlog 20 Model M60 Configuration Examples

Software SmartGraph3

The HUMLOG20-M60 is equipped with a digital input, which allows the connection of up to four external humidity/

temperature sensors.

Two additional analogue inputs for sensors with voltage or current output, Pt100 temperature sensors in 3 and 4 wire

technology or Thermocouple J, K and S offer highest flexibility in the application.

Each fully equipped HUMLOG20-M60 is a 10 channel data logger that can record various data.

max. 150 m

Sensor 1

Sensor 2

Sensor 3

Sensor 4

2 x analogue input:

4...20 mA

0...20 mA

0...1 V

Pt100 3-wire

Pt100 4-wire

Thermocouple K,J,S