5

TA13 Ordering Key

TA13

Version: 20230923-H

Load and Speed

Voltage

Cable Length (mm)

Output Signal

Quick Release

Plug

See page 8

Color

Direction of

Rear Attachment

(Counterclockwise)

See page 7

5 = 24V DC, PTC or thermal protector

7 = 36V DC, PTC or thermal protector

1 = Straight, 500

2 = Straight, 750

3 = Straight, 1000

4 = Straight, 1250

5 = Straight, 1500

6 = Straight, 2000

7 = Curly, 200

8 = Curly, 400

0 = Without

2 = Hall sensor*2

3 = Reed sensor

0 = Without

1 = Black (Pantone Cool Gray 9C cable cover + black cable)

2 = Grey (Pantone Cool Gray 9C cable cover + Pantone 428C cable)

1 = 0°

3 = 90°

Stroke (mm)

Retracted Length

(mm)

Functions for

Limit Switches

See page 8

1 = Two switches at full retracted / extended positions to cut current

2 = Two switches at full retracted / extended positions to cut current + third one in between to send signal

3 = Two switches at full retracted / extended positions to send signal

4 = Two switches at full retracted / extended positions to send signal + third one in between to send signal

See page 2

See page 6

See page 2

Rear Attachment

(mm)

See page 7

Front Attachment

(mm)

See page 7

1 = Iron CNC, U clevis, slot 8.2, depth 17, hole 10.2, with

plastic T-bushing

2 = Iron CNC, U clevis, slot 8.2, depth 17, hole 12.2

3 = Iron CNC, U clevis, slot 10.2, depth 17, hole 10.2,

with plastic T-bushing

4 = Iron CNC, U clevis, slot 10.2, depth 17, hole 12.2

Special Functions

for Spindle Sub-

Assembly

0 = Without (Standard)

1 = Safety nut

2 = Standard push only

3 = Standard push only + safety nut

1 = DIN 6P, 90° plug

2 = Tinned leads

M = DIN 4P, dental chair plug (40510-143, standard)

N = DIN 4P, dental chair plug (40510-040)

1 = Iron CNC, U clevis, slot 8.2, depth 17, hole 10.2, with

plastic T-bushing

2 = Iron CNC, U clevis, slot 8.2, depth 17, hole 12.2

3 = Iron CNC, U clevis, slot 10.2, depth 17, hole 10.2,

with plastic T-bushing

4 = Iron CNC, U clevis, slot 10.2, depth 17, hole 12.2

B = Punched hole on inner tube + plastic cap, width 32,

without slot, hole 10.2

C = Punched hole on inner tube + plastic cap, width 32,

without slot, hole 12.2

J = Aluminum casting, without slot, hole 10.2, for dental

chair