S4100 MULTI-FUNCTION READER MODULE

11-06-22-715 10/2003

8

WWW.TI-RFID.COM

MECHANICAL PROPERTIES

Figure 8 describes board dimensions and mounting hole locations. The module is designed to be easily mounted

to a motherboard, communicating through the header pins, but can also be inserted into existing equipment using

connectors J1 and J7 for connectivity.

Figure 8. MFR Module Board Dimensions.

Texas Instruments (TI) reserves the right to make changes to its products or services or to discontinue any product or service

at any time without notice. TI provides customer assistance in various technical areas, but does not have full access to data

concerning the use and applications of customer's products. Therefore, TI assumes no liability and is not responsible for

customer applications or product or software design or performance relating to systems or applications incorporating TI

products. In addition, TI assumes no liability and is not responsible for infringement of patents and/or any other intellectual or

industrial property rights of third parties, which may result from assistance provided by TI. TI products are not designed,

intended, authorized or warranted to be suitable for life support applications or any other life critical applications which could

involve potential risk of death, personal injury or severe property or environmental damage.