HT360 datasheet(11/46 Pages) HANTEK

11 / 46 page

Safety requirements

HT360 series user manual

106 °F ~

122 °F (+41 °C~45 °C): relative humidity ≤ 60%

The surrounding environment is free of vibration, strong magnetic field, corrosive

medium and serious dust.

Warning:

To avoid the risk of short circuit or electric shock in the internal circuit, do not

operate in a humid environment.

Altitude

When operating and not operating: 3000m (10000 feet).

Random vibration: 0.31 g RMS at 50Hz to 500Hz, 10 minutes per axial direction.

When not operating: 2.46g RMS from 5Hz to 500Hz, 10 minutes per axial direction.

Installation (overvoltage) category

This product is powered by a main power supply conforming to installation (overvoltage)

category II.

Warning:

Ensure that no over-voltage (such as lightning) reaches the product. Otherwise,

operators may be exposed to electric shock.

Definition of install (overvoltage) category

Installation (overvoltage) class I is the signal level that applies to the measuring

terminal of the device connected to the source circuit, where measures have been

taken to limit the instantaneous voltage to a correspondingly low level.

Installation (overvoltage) class II refers to the local distribution level, which is applicable

to devices connected to the mains (AC power supply).

Degree of pollution

2 class

Definition of pollution level



Pollution Level 1: No pollution, or only dry non-conductive pollution. This level of

contamination has no effect. Examples: clean rooms or office with air conditioning.



Pollution level 2: Generally only dry non-conductive pollution occurs. Temporary

conduction due to condensation may sometimes occur. Examples: general indoor

HT360 датащи(PDF) 11 Page - Qingdao Hantek Electronic Co., Ltd.