Page 3/4

Miniature IEPE Triaxial Accelerometer, with TEDS Option, Type 8763B…

This information corresponds to the current state of knowledge. Kistler reserves the

right to make technical changes. Liability for consequential damage resulting from

the use of Kistler products is excluded.

© 2014 ... 2021 Kistler Instrument Corp.,

75 John Glenn Dr., Amherst, NY 14228

Tel. 716-691-5100, sales.us@kistler.com, www.kistler.com. Kistler is a registered

trademark of Kistler Holding AG. Kistler Group products are protected by various

intellectual property rights. For more details visit www.kistler.com

Ordering Key

Type 8763B...

Measuring Range

±50 g

050

±100 g

100

±250 g

250

±500 g

500

±1 000 g

1K0

±2 000 g

2K0

Connector

M4.5, 4 pin (pos.)

A

Standard, ¼–28, 4 pin (pos.)

[only in 50, 100, 250 & 500 g ranges]

B

Waterproof IP68

C

Variants/TEDS Templates

Base model (without TEDS)

B

Default, IEEE 1451.4 V0.9

Template 0 (UTID 1)*

T

IEEE 1451.4 V0.9 Template 24

(UTID 116225)*

T01

LMS Template 117,

Free format Point ID*

T02

LMS Template 118, Automotive

Format (Field 14 Geometry = 0)*

T03

LMS Template 118, Aerospace Format

(Field 14 Geometry =1)*

T04

P1451.4 V1.0 template 25 -

Transfer Function Disabled*

T05

P1451.4 V1.0 template 25 -

Transfer Function Enabled*

T06

Cable Length

To be specified upon order

(for integral cable waterproof

Type 8763BxCB only) – Max. = 20 m

SP

No integral cable

(A & B connector options)

—

Accessing TEDS Data

Accelerometers with a “T” suffix are variants of the standard

version incorporating the 'Smart Sensor' design. Viewing an

accelerometer’s data sheet requires a TEDS compatible data

acquisition system. Their Interface provides negative current

excitation (reverse polarity) altering the operating mode of the

PiezoSmart sensor, allowing the program editor software to read

or add information contained in the memory chip.

Mounting

Reliable and accurate measurements require that the mounting

surface be clean and flat. The sensor can be attached to the

structure with wax or adhesive or using the supplied adaptor

stud. The instruction manual for Type 8763B… provides detailed

information regarding mounting surface preparation.

Optional Accessories

Type

• 5-40 stud to 10-32 stud, ground

isolated mounting base

8400K06

• 5-40 stud to M6 stud,

ground isolated mounting base

8400K04

• 5-40 stud, ground isolated

adhesive mounting base

8440K01

• 5-40 to M6 stud

8418

• 5-40 stud to 5-40 Hex

8420

• Adhesive, ground isolated mount-

ing base, 5-40 threaded hole

8434

• Magnetic mounting base,

5-40 threaded hole

8450A

Optional Cables*

Type

• Fluoropolymer jacketed breakout

cable, ¼–28, 4 pin (neg.) to 3x BNC

(pos.); (xx = length: 3, 5, 10 meters)

1756CxxK04

• Fluoropolymer jacketed breakout cable,

M4.5 4 pin (neg.) to 3x BNC (pos.);

(xx = length: 1, 3, 5 & 10 meters)

1784BxxK03

• Fluoropolymer jacketed cable, M4.5,

4 pin (neg.) to ¼–28, 4 pin (pos.);

(length = 0.5 and sp meters)

1784AK02

• Flexible silicone jacketed breakout

cable, ¼–28, 4 pin (neg.) to 3x BNC

(pos.); (xx = length: 1, 3, 5, 10 meters)

1734AxxK03/K04

Accessories Included

Type

• Mounting stud, 5-40 to 10-32

8416

• Mounting wax (except for integral cable sensors) 8432

• Mounting stud, 5-40 to M6

8418

• ISO 17025 Calibration Certificate

*

Special lengths available; please contact Kistler

*

With A & B connectors type only as a standard. For any

combination of both TEDS and Waterproof capabilities,

please contact Kistler.