| поискавой системы для электроныых деталей |
|
AT89LP216 датащи(PDF) 65 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
AT89LP216 датащи(HTML) 65 Page - ATMEL Corporation |
|
65 / 90 page ![]() 65 3621A–MICRO–6/06 AT89LP216 [Preliminary] 23. Programming the Flash Memory The Atmel AT89LP216 microcontroller features 2K bytes of on-chip In-System Programmable Flash program memory. In-System Programming allows programming and reprogramming of the microcontroller positioned inside the end system. Using a simple 4-wire SPI interface, the In- System programmer communicates serially with the AT89LP216 microcontroller, reprogram- ming all nonvolatile memories on the chip. In-System Programming eliminates the need for physical removal of the chips from the system. This will save time and money, both during devel- opment in the lab, and when updating the software or parameters in the field. The ISP interface of the AT89LP216 includes the following features: • Four-wire SPI Programming Interface • Active-low Reset Entry into Programming • Slave Select allows multiple devices on same interface • User Signature Array • Flexible Page Programming • Row Erase Capability • Page Write with Auto-Erase Commands • Programming Status Register For more detailed information on In-System Programming, refer to the Application Note entitled “AT89LP In-System Programming Specification”. 23.1 Physical Interface In-System Programming utilizes the Serial Peripheral Interface (SPI) pins of an AT89LP216 microcontroller. The SPI is a full-duplex synchronous serial interface consisting of four wires: Serial Clock (SCK), Master-In/Slave-out (MISO), Master-out/Slave-in (MOSI), and an active-low Slave Select (SS). When programming an AT89LP216 device, the programmer always operates as the SPI master, and the target system always operates as the SPI slave. To enter or remain in In-System Programming mode the device’s reset line (RST) must be held active (low). With the addition of VCC and GND, an AT89LP216 microcontroller can be programmed with a mini- mum of seven connections as shown in Figure 23-1. Figure 23-1. In-System Programming Device Connections AT89LP216 VCC P1.3/RST P1.7/SCK P1.5/MOSI GND Serial Clock Serial In RST P1.4/SS P1.6/MISO Serial Out SS |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |