O V ERVI EW

®

Phone: 949-450-8700

Fax: 949-450-8710

E-mail: info@broadcom.com

Web: www.broadcom.com

BROADCOM CORPORATION

16215 Alton Parkway, P.O. Box 57013

Irvine, California 92619-7013

© 2004 by BROADCOM CORPORATION. All rights reserved.

5364_5364P-PB00-R 04/01/04

or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the

property of their respective owners.

Broadcom's BCM5364 and BCM5364P, two System-On-Chips, are the

most highly integrated access switch processor there are. The

BCM5364/BCM5364P also features an on-chip, five-port 10/100

Ethernet switch with management features. This switch processor also

offers extensive processor and interface integration featuring an

integrated 200-MHz MIPS32™ core, UART, flash and SDRAM/

DDRAM interfaces. The BCM5364P also supports a PCI interface. Both

the devices support IPSec encryption and authentication in a single pass.

The integrated 200-MHz MIPS32™ core of the BCM5364/BCM5364P

has a 2-way set-associative 8-KB instruction cache and a 4-KB data

cache The CPU includes the MMU, which enables support for various

RTOS.

The BCM5364/BCM5364P also supports interfaces that enable system-

level cost savings, a better form factor, and lower power dissipation. The

BCM5364/BCM5364P supports up to 512 MB of SDRAM/DDRAM

and 64 MB of flash memory.

The BCM5364P also supports the PCI version 2.2, 32-bit/33-MHz host

interface, allowing enumeration of four external PCI peripherals as a

way to extend system functionality. The UART enables a glueless

interface to serial devices such as modems.

Broadcom provides its proven API and drivers for integration with third-

party application software. Broadcom also offers application software to

build complete system applications. Application software support

includes functions such as firewall (dynamic firewall, DMZ hosting,

filtering-IP/TCP, NAT/PAT), VPN (IKE engines, IPSec drivers and

API, PPTP-passthrough, PPPoE client-PAP and CHAP authentication),

QoS/CoS/ToS (static and dynamic Ethernet routing, VLAN tagging),

and many other features.

A single BCM5364/BCM5364P based platform is easy to reuse for

other types of access to market segment equipment ranging in throughput

performance from T1/E1 to 100 Mbps. This equipment includes wireless

and wired home/residential and SOHO firewall and VPN appliances,

wireless access points, and many types of customer premises equipment

(CPE) devices.

SDRAM I/F

GPIO

UART

FLASH

I/F

128-KB

Packet Buffer

4-Port 10/100

LAN PHY

Ethernet MAC/MII

200-MHz

MIPS32

Core

10/100

WAN PHY

Ethernet

Switch

Controller

PCI 2.2

Host

(32-Bit/33-MHz)

On-Chip Bus

On-Chip Bus

Symmetric Key

Engine

75 Mbps

8-KB I-CACHE

MMU

4-KB D-CACHE

USB

Note: PCI Interface Supported in 5365P Only