PART NO.

472900201

MATERIAL

Brass; Finish: Nickel plated

A SERIES

STOP RINGS

SWITCH ENCLOSURES

TC-2 THRU-BOLT MOUNTING, 1/2-14 NPSM CONDUIT THREAD (Straight Thread)

TC-4 THRU-BOLT MOUNTING, 1/2-14 NPT CONDUIT THREAD (Tapered Thread)

638100000

638101000

INNER-W/SHORT TAB

OUTER-W/LONG TAB

PART NO.

One each required for setting stops.

M SERIES

TC-3 FLANGE MOUNTING, 1/2-14 NPSM CONDUIT THREAD (Straight Thread)

TC-5 FLANGE MOUNTING, 1/2-14 NPT CONDUIT THREAD (Tapered Thread)

L

C&K Hardware

L-26

www.ittcannon.com

ITT Industries

Cannon

These enclosures make it easy to install HB and HG Series switches with electrical conduit, electrical tubing or armored cable.

The switch is inserted through the open top of the enclosure and is secured by two screws (furnished). The lower section of the

enclosure is completely removable and gives free access to the switch terminals. Switches having either the flat base or step base

can be used. Switches must be ordered separately.