33

Additional Products

other MIL-5015 type connectors

from Amphenol

Amphenol® MS/Standard MIL-5015 Connectors

MS/Standard MIL-5015 Type Connectors

Amphenol has long been the accepted leader in providing MS/Standard

MIL-5015 type connectors. When a Mil-Spec 5015 connector is

required, these connectors provide well-proven electrical capability.

They are tested to strict adherence to military specifications, and they

are offered in a very broad range of product styles and options. Features

include:

• medium to heavy weight cylindrical with resilient inserts

• environmental resistant

• threaded couplings, single key/keyway shell polarization

• operating voltage to 3000 VAC (RMS) at sea level

• 5 shell styles, 19 shell sizes, 280 contact arrangements

• solder or crimp contacts (non-rear-release type),

sizes 16–0 accepting 22–0 AWG

• coaxial or thermocouple contact options

• alternate insert positioning

• hermetic configurations available

• zinc alloy plating (cadmium-free) available

Within the MS/Standard family there are five mil-spec classes to meet

different requirements:

A – Solid Shell – for general, non-environmental applications.

C – Pressurized – for use on pressurized bulkheads or pressure barri-

ers; limits air leakage regardless of type and class of plug mated

with them.

E/F – Environmental Resisting with Strain Relief – designed for applications where the connector will be exposed to

moisture, vibration, and rapid changes in pressure and temperature.

R – Lightweight Environmental Resisting – shorter in length, lighter in weight than the E & F classes, the MS-R offers

a high degree of reliability under adverse conditions: recommended for new design applications.

See online (www.amphenol-industrial.com) or ask for Amphenol catalog 12-020 which gives detailed information on

this family of connectors.

Amphenol® Pre-Earth FMLB Connectors

Amphenol® Pre-Earth/First Mate Last Break Connectors are designed for

applications where a protective circuit from the ground contact to the shell

is a safety requirement. These connectors provide a path for any stray

voltage to be shunted to a safe ground avoiding harm to the operator and

the voltage sensitive equipment.

Features of Pre-Earth FMLB (DL Series) Connectors:

• MIL-5015 dimensions and performance where applicable.

• Conformity with European safety standards (DIN VDE 0627 and certi-

fied through TUV Product Service GMBH) in the approved insert

arrangement. Offered in shell styles: 3102A box mount, 3106A straight

plug, 3108A 90 degree plug.

• Intermateable with MS 5015 and 97 Series styles.

• Class IP67 protection in the mated condition.

• Main joint gasket between plug and receptacle shells provides

superior moisture sealing.

• Pre-earth (ground contact) design.

• First mate, last break capability.

• Standard plating is black zinc alloy. Green zinc plating is an option.

See online (www.amphenol-industrial.com) or ask for Amphenol Product

Data sheet #187 for detailed information on Pre-Earth FMLB Connectors.

Amphenol® Pre-Earth FMLB

Connectors

Pre-Earth (ground) contact

mates first and provides safety

from voltage outputs -

protects operators and sensi-

tive circuits.

other SAE AS50151 type connectors

from Amphenol

MS/Standard SAE AS50151 Type Connectors

Amphenol has long been the accepted leader in providing MS/Standard

SAE AS50151 type connectors. When a Mil-Spec 5015 connector is

required, these connectors provide well-proven electrical capability.

They are tested to strict adherence to military specifications, and

they are offered in a very broad range of product styles and options.

Features include:

• SAE AS50151 dimensions and performance where applicable.

• Conformity with European safety standards (DIN VDE 0627 and

certified through TUV Product Service GMBH) in the approved

insert arrangement. Offered in shell styles: 3102A box mount,

3106A straight plug, 3108A 90 degree plug.

• Intermateable with SAE AS50151 and 97 Series styles.

• Class IP67 protection in the mated condition.

• Main joint gasket between plug and receptacle shells provides

superior moisture sealing.

• Pre-earth (ground contact) design.

• First mate, last break capability.

• Standard plating is black zinc alloy. Green zinc plating is an option.

See online (www.amphenol-industrial.com) or ask for Amphenol Product

Data sheet #187 for detailed information on Pre-Earth FMLB Connectors.

Amphenol MS/Standard SAE AS50151 Connectors

See online (www.amphenol-industrial.com) or ask for Amphenol catalog IC-5 5015/AC Threaded which gives detailed

information on the family of connectors.