SNR016

16M-bit Mask ROM

1. INTRODUCTION

The SNR016 is a signal power, 16M-bit, read only memory. It is organized as 2M bytes,

operates for single 3V power supply, support static standby mode. The SNR016

embedded two different interfaces, one is a standard 8-bit interface bus which

compatible with SNL310, another one is a special 8-bit AD (address/data) bus which

compatible with SNC710.

SNR016 offers automatic power-down, with power-down controlled by the chip enable

“CEB”. When chip enable goes to high, SNR016 will entry power-down mode in order

to save the power consumption.

2. FEATURES

Power supply: 2.4V ~ 3.6V

♦

♦

♦

♦

♦

Memory Size: 16M-bit

Totally static operation

Embedded a standard 8-bit bus interface compatible with SNL310 or a 8-bit AD

(address/data) bus interface compatible with SNC710

Access time: 200ns @3V

3. PIN ASSIGNMENTS

Symbol

I/O

Standard ROM interface

AD Bus interface

TYPE

I 0: Standard ROM type

1: AD Bus interface

A[8..20]

I Standard ROM Address [8..20]

NC

A[7]

I Standard ROM Address A7

TESTM

A[6]

I Standard ROM Address A6

Bank Select 4

A[5]

I Standard ROM Address A5

Bank Select 3

A[4]

I Standard ROM Address A4

Bank Select 2

A[3]

I Standard ROM Address A3

Bank Select 1

A[2]

I Standard ROM Address A2

NC

A[1]

I Standard ROM Address A1

ALECLK

A[0]

I Standard ROM Address A0

READY

D[0..7]

I/O Standard ROM Data [0..7]

Address/Data bus [0..7]

CEB

I Standard ROM Chip Enable

Chip Enable

OEB

I Standard ROM Output Enable

NC

VDD

P 3.3volt Positive Power supply

3.3volt Positive Power supply

GND

P Ground

Ground

Ver. 1.4

October 21, 2005

3