May 4, 2020

CONFIDENTIAL INFORMATION Rev. 1.2

SABRE9006A Datasheet

29

ESS TECHNOLOGY, INC. 237 South Hillview Drive, Milpitas, CA 95035, USA Tel (408) 643-

8800 • Fax (408) 643-8801

ORDERING INFORMATION

Part Number

Description

Package

SABRE9006AS

Sabre Premier 8-channel Audio DAC

48-pin LQFP

The letter S at the end of the part number identifies the package type LQFP

Revision History

Revision

Date

Notes

0.1

May 20 2014

Initial version

0.2

July 22, 2014

Updated ESS’ FAX number.Added medical usage legal disclaimer.

Page 17, corrected polarity of U2 on differential current mode circuit

0.3

August 20, 2014

Pins 13 & 25 changed from VDD to NC. Pins 21 & 47 remain as VDD pins

0.4

September 16, 2014

Updated DAC output resistance from 781.25

 to 83411%

0.5

January 22, 2015

Updated formatting and corrected typos.

0.6

April 14, 2015

Corrected formulae in Analog Performance Table.

Updated ESS’ address and phone number.

0.61

April 30, 2015

Updated the product overview on cover page.

0.7

May 26, 2015

Corrected Master Trim register addresses.

Added programmable FIR function.

0.71

May 27, 2015

Added note that pins 13 & 25 can be connected to VDD or GND if desired.

0.8

February 18, 2016

Corrected typical differential output current range from 3.903 mAp-p to

3.656 mAp-p

0.9

November 28, 2017

Remove ESS logo from pin diagram

1.0

January 15, 2019

Added Tja and Tjc values for recommended operation conditions.

1.1

September 12, 2019

Changed Hyperstream

™ to Hyperstream®

1.2

May 4, 2020

Update register 16: volume config

ESS IC's are not intended, authorized, or warranted for use as components in military applications, medical devices or life support systems. ESS

assumes no liability whatsoever and disclaims any expressed, implied or statutory warranty for use of ESS IC's in such unsuitable applications.

No part of this publication may be reproduced, stored in a retrieval system, transmitted, or translated in any form or by any means, electronic,

ESS IC's are not intended, authorized, or warranted for use as components in military applications, medical devices or life support systems.ESS

assumes no liability whatsoever and disclaims any expressed, implied or statutory warranty for use of ESS IC's in such unsuitable applications.

No part of this publication may be reproduced, stored in a retrieval system, transmitted, or translated in any form or by any means, electronic,

mechanical, manual, optical, or otherwise, without the prior written permission of ESS Technology, Inc. ESS Technology, Inc. makes no representations

or warranties regarding the content of this document.All specifications are subject to change without prior notice. ESS Technology, Inc. assumes no

responsibility for any errors contained herein.U.S.patents pending.