DATA SHEET

MOS INTEGRATED CIRCUIT

µµµµPD16856

MONOLITHIC CD-ROM 3-PHASE SPINDLE MOTOR DRIVER

Document No. S13447EJ1V0DS00 (1st edition)

Date Published April 1999 N CP(K)

Printed in Japan

©

1999

The information in this document is subject to change without notice.

The

µPD16856 is a CD-ROM 3-phase spindle motor driver consisting of a CMOS controller and MOS bridge

outputs.

By employing 3-phase full-wave PWM as the drive method and MOS FETs at the output stage, it has been

possible to reduce the power consumption of the

µPD16856 ever further than the conventional linear drive drivers

that use bipolar transistors.

By using a 30-pin shrink SOP package, a more compact-size has been achieved.

FEATURES

•

Supply voltage for controller block: 5 V, supply voltage for output block: 12 V

3 V input available for the input interface

•

Low on-state resistance (total on-state resistance of upper and lower MOS FETs) RON = 1.3

Ω (TYP.)

•

Low power consumption due to 3-phase full-wave PWM drive method

•

On-chip hole bias switch (linked with STB pin)

•

On-chip IND (FG) pulse switching function, 1-phase output or 3-phase composite output

•

START/STOP pin included, acting as a brake during STOP

•

Standby pins included, turning off internal circuit in standby

•

Low current consumption: IDD = 3 mA (Max.), IDD (ST) = 1

µA (Max.)

•

On-chip thermal shutdown circuit

•

On-chip current limiting circuit; reference voltage can be set externally

•

On-chip low voltage malfunction prevention circuit

•

On-chip reverse rotation prevention circuit

•

30-pin plastic shrink SOP (300 mil)

ORDERING INFORMATION

Part Number

Package

µPD16856GS

30-pin shrink SOP (0.8-mm pitch, 300 mil)