The Specialist In Drum Handling Equipment

Vertical-Lift Drum Pourers

Copyright 2023 - Morse Mfg. Co., Inc.

Spec Sheet 500

(Updated 11 Aug, 2023)

1

MADE

IN

USA

service@morsedrum.com

103 Kuhn Rd.

Syracuse, NY, 13208 USA

morsedrum.com

(315) 437-8475

Two Types of Scales

The digital indicator keeps you informed of the drum weight, so you can weigh while pouring.

Scales are simple to use and to read enabling accurate batching by weight. The touch pads

include numbers for tare entry. Four load cells accurately sense weight regardless of the tilt

angle of the drum. Battery saving “sleep” mode turns indicator off when scale is not in use.

Display weight to 0.1 Lb. (or set to diplay metric units). Accuracy of +/-0.2

%. Scale has NO data storage capability.

Maximum operating temperature is 104o F (40o C).

Scale components will be installed and calibrated before leaving the

Morse factory. However, the rigors of transportation may change scale

calibration. To assure proper accuracy, the user should employ local

scale service personnel to check the function and calibration of the scale.

Cost of on-site calibration is not included in the selling price.

T-Type Scale - Intrinsically safe, ultra low power intensity (ULPI)

scale indicator for use in many hazardous areas, approved for all

classes, groups and divisions of N.E.C. hazardous environment

classifications. The hand pumped or air powered drum handler with this

intrinsically safe weighing system may be used in many hazard areas

where ordinary electric powered equipment would be prohibited. Comes

with battery pack and 115V 60Hz charger. For 220V/50Hz applications,

battery charger will require a step down transformer - order part number

93740-P. Models with spark resistant monel parts, such as drum holder

bands are indicated by an “M” in the model number.

N-Type Scale - Economical general purpose instrument for use

in a variety of weighing applications. NOT for use in hazardous areas.

Powered by five ordinary alkaline D-cell batteries.

> > Watch Video < <

Lift and Control Dispensing of Your Drum

* Half-full rating is based on tilt mechanism’s capacity for handling a bottom

heavy drum. A partially full drum with unbalanced and shifting load is harder

to tilt than a full drum.

“T” Type Intrinsically safe

scale indicator for use in

hazardous areas.

“N” Type scale indicator

NOT for hazardous

environments.

Scale-Equipped Models - Weigh As You Pour!

Model 515-T-114 shown is equipped with

an intrinsically safe scale and air powered

lift and tilt.

Drum Handling System

Model 520-115 shown

has DC powered lift and

tilt to pour a drum up to

106” (2.7 m) high.

•

Lift, move and control dispensing of your drum

up to 106” (269 cm) high

•

You control the lifting height and pouring angle

•

Power Lift and Tilt Options

•

Available built-in weighing capability to weigh

as you pour!

•

360o Tilt Control in either direction

•

Models available with spark resistant parts

•

Capacity:

800 Lb. (363 kg) full drum

500 Lb. (227 kg) half-full* drum

Lift, tilt and drain drum contents with ease. Hydraulic

lift and tilt makes it simple to raise and tilt a heavy

drum. Vertical lifting track keeps drum reach constant

through the full lift range. Heavy duty hydraulic lift

cylinders include a velocity fuse to provide a full line

shut-off in the event of a line failure.

Dispense into a vat, hopper, mixer or other container

up to 106” (269 cm) high.

Manual lift and tilt also available.

With Scale-Equipped Series, know the weight of what

you have poured!

•

Automatically adjusts for 22” to 23.5”

(56 to 59.7 cm) diameter drum

•

Accepts Diameter Adaptors for your smaller drum

•

Bolt-On Bracket Assembly to handle a plastic drum,

recommended to more securely handle a fiber drum

•

Bolt-on Top Rim Clamp for 55-gallon

(210 liter) plastic drum or fiber drum

•

Includes a flexible cover on the cinch chain to help

protect the sidewall of your drum

•

Incorporates alloy cinch chain and durable stress

relief weld joints