PRINTED IN CANADA

Copyright © Greystone Energy Systems Inc. All Rights Reserved

www.greystoneenergy.com

PS-CSGNG200XXX-02

01/20

Greystone Energy Systems, Inc.

150 English Drive, Moncton,

New Brunswick, Canada E1E 4G7

Ph: +1 (506) 853-3057 Fax: +1 (506) 853-6014

North America: 1-800-561-5611

E-mail: mail@greystoneenergy.com

CURRENT SWITCH

CS-GNG-200

PRODUCT DESCRIPTION

The CS Series current switch monitors line current

for electrical loads such as pumps, conveyors,

lighting, heaters or fans and closes the output

contacts when the trip point is exceeded. The CS-

GnG-200 has a factory set trip point of 0.75 Amps to

provide Go/No Go status operation.

The sensor requires no external power as it is totally

powered by induction from the AC line being

monitored. The switch output is normally open and

when the input current exceeds the trip setpoint

the switch closes to provide an on/off digital signal

to the controller.

TYPICAL INSTALLATION

For complete installation and wiring details,

please refer to the product installation

instructions.

The CS-GnG-200 provides mounting tabs to secure

the device inside a motor control panel using (2)

#10 screws.

The sensor has a 2 wire connection to the Building

Automation System.

CURRENT SWITCH GO/NO GO

CS-GnG-200

ORDERING

CS-GnG-200

PART NUMBER

NOTE: Greystone Energy Systems, Inc. reserves the right to make design modifications without prior notice.

CURRENT SETPOINT

Fixed at 0.75 Amps

MAXIMUM INPUT CURRENT

200 Amps continuous

SENSOR POWER

Self-powered

OUTPUT TYPE

Solid-state mosfet

OUTPUT SWITCH ACTION

Normally open

OUTPUT SWITCH RATINGS

30 Vac/dc, 500 mA maximum

VON @ 24 VDC AT 500 mA

<50 mV

FREQUENCY

50/60 Hz

RESPONSE TIME

200 mS typical

INSULATION CLASS

600 Vac, insulated conductors

OPERATING TEMPERATURE

-15 to 60°C (5 to 140°F)

OPERATING HUMIDITY

5 to 90 %RH non-condensing

WIRING CONNECTIONS

Screw terminal block (14 to 22 AWG)

DIMENSIONS

67mm W x 68mm H x 24.1mm D (2.65” x 2.7” x 0.95”)

SENSOR APERTURE

20.3mm (0.8”)

ENCLOSURE MATERIAL

ABS/PC, UL94-V0

AGENCY APPROVALS

cULus listed

SPECIFICATIONS

47mm

1.85”

ø20.3mm

ø0.8”

67.3mm

2.65”

66mm

2.60”

Insulated Conductors Only

600 Vac max

100 Amps max

55.9mm

2.2”

24.9mm

0.98”