GREYSTONE IS AN ISO 9001 REGISTERED QUALITY SYSTEM

HIGH ACCURACY GLASS TEMPERATURE TRANSMITTER

HATXGL SERIES

PRODUCT DESCRIPTION

The high accuracy single point glass temperature

transmitter utilizes a precision sensor encapsulated

in a 31.75mm L x 9.525mm W x 9.525 mm H (1.25”

x .375” x .375”) Aluminum probe. Standard wire

length is 1.524m (5’). All probes are constructed

to provide excellent heat transfer, fast response,

and are potted to resist moisture penetration. It is

available with a variety of enclosures. A transmitter

that provides a high accuracy signal with excellent

long term stability, low hysteresis and fast

response is available with various ranges.

TYPICAL INSTALLATION

For complete installation and wiring details,

please refer to the product installation

instructions.

Find a suitable location on an exterior window

where both the probe and enclosure can be

mounted. On one side apply epoxy compound and

press firmly against the glass. Hold in place until

the epoxy has set.

Encloure provides mounting tabs for ease of

installation.

NOTE: This product is factory calibrated and any field adjustment will void the warranty.

CABLE GLAND FITTING

THREAD ADAPTER 1/2” NPT TO M16

ACCESSORIES - INCLUDED WITH E ENCLOSURE OPTION

SENSOR TYPE

1000Ω Platinum, IEC 751, 385 Alpha, thin film

SENSOR ACCURACY

RTD Class A: ±0.15°C (±0.27°F) @ 0°C (32°F)

RTD 1/3 DIN: ±0.1°C (±0.18°F) @ 0°C (32°F)

RTD 1/10 DIN: ±0.03°C (±0.054°F) @ 0°C (32°F)

PROBE SENSING RANGE

-20 to 100°C (-4 to 212°F)

WIRE MATERIAL

FT-4, 22 AWG

WIRE LENGTH

1.524m (5’)

PROBE MATERIAL

Aluminum

PROBE DIMENSIONS

31.75mm L x 9.525mm W x 9.525mm H (1.25” x 0.375” x 0.375”)

OUTPUT SIGNAL

4-20 mA current loop, 0-5 Vdc, or 0-10 Vdc (factory configured)

TRANSMITTER ACCURACY

±0.1% of span, including linearity

OUTPUT DRIVE @ 24 VDC

Current: 600Ω maximum

Voltage: 10 KΩ minimum

POWER SUPPLY

0-5 Vdc: 10-35 Vdc or 10-28 Vac

0-10 Vdc: 15-35 Vdc or 15-28 Vac

4-20 mA: 15-35 Vdc (Loop-powered) or 22-28 Vac

CURRENT CONSUMPTION

Current: 20 mA

Voltage: 5 mA

MAXIMUM CURRENT (VOLTAGE)

5 mA nominal

MAXIMUM OUTPUT (VOLTAGE)

Limited to <5.5 vdc for 0-5 Vdc, <10.5 for 0-10 Vdc

INPUT VOLTAGE EFFECT

Negligible over specified operating range

PROTECTION CIRCUITRY

Reverse voltage protected and output limited

AMBIENT OPERATING RANGE

-40 to 50°C (-40 to 122°F), 0 to 95 %RH non-condensing

ENCLOSURE

A: ABS, UL94-V0, IP65 (NEMA 4X)

E: Same as A, with thread adapter (1/2” NPT to M16) and cable gland fitting

TERMINATION

Terminal block (14 to 22 AWG)

COUNTRY OF ORIGIN

Canada

SPECIFICATIONS

82.5 mm

3.25"

69.8 mm

2.75"

1/2” NPT

76.2 mm

3.00"

52.0 mm

2.05"

1.5 m

5’

9.525 mm

0.375"

31.75 mm

1.25”

FT-4, 22 AWG

Aluminum