NB6L14

http://onsemi.com

5

Symbol

Characteristic

Min

Typ

Max

Unit

≤ 1.25 GHz

550

380

250

700

500

320

mV

Propagation Delay

IN to Q

350

ps

Set−Up Time (Note 11)

EN to IN, IN

300

ps

Hold Time (Note 11)

EN to IN, IN

300

ps

Within−Device Skew (Note 12)

Device to Device Skew (Note 13)

5.0

20

150

ps

RMS Random Jitter (Note 14)

Peak−to−Peak Data Dependent Jitter

(Note 15)

14

1.0

ps

Input Voltage Swing/Sensitivity

(Differential Configuration) (Note 10)

100

2800

mV

Output Rise/Fall Times @ Full Output Swing

(20%−80%)

70

150

200

ps

NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit

board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared

operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit

values are applied individually under normal operating conditions and not valid simultaneously.

40 ps (20%−80%).

10.Input and output voltage swing is a single−ended measurement operating in differential mode.

11. Set−up and hold times apply to synchronous applications that intend to enable/disable before the next clock cycle. For asynchronous

applications, set−up and hold times do not apply.

12.Within device skew is measured between two different outputs under identical power supply, temperature and input conditions.

13.Device to device skew is measured between outputs under identical transition @ 0.5 GHz.

14.Additive RMS jitter with 50% duty cycle clock signal.