ADCMP603BCPZ-R7 datasheet(7/16 Pages) AD

7 / 16 page

ADCMP603

Rev. 0 | Page 7 of 16

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

PIN 1

INDICATOR

VCCO

VCCI

VEE

9VEE

8LE/HYS

7SDN

TOP VIEW

(Not to Scale)

ADCMP603

Figure 3. ADCMP603 Pin Configuration

Table 5. Pin Function Descriptions

Pin No.

Mnemonic

Description

Output Section Supply.

CCO

VCCI

Input Section Supply.

VEE

Negative Supply Voltage.

Noninverting Analog Input.

VEE

Negative Supply Voltage.

Inverting Analog Input.

SDN

Shutdown. Drive this pin low to shut down the device.

LE/HYS

Latch/Hysteresis Control. Bias with resistor or current for hysteresis adjustment; drive low to latch.

VEE

Negative Supply Voltage.

Inverting Output. Q is at logic low if the analog voltage at the noninverting input, VP, is greater than the analog

voltage at the inverting input, VN, if the comparator is in compare mode. See the LE/HYS pin description (Pin 8)

for more information.

VEE

Negative Supply Voltage.

Noninverting Output. Q is at logic high if the analog voltage at the noninverting input, VP, is greater than the

analog voltage at the inverting input, VN, if the comparator is in compare mode. See the LE pin description

(Pin 8) for more information.

Heat Sink

Paddle

The metallic back surface of the package is electrically connected to V

. It can be left floating because Pin 3, Pin 5,

Pin 9, and Pin 11 provide adequate electrical connection. It can also be soldered to the application board if

improved thermal and/or mechanical stability is desired. Exposed metal at package corners is connected to the

heat sink paddle.

ADCMP603BCPZ-R7 датащи(PDF) 7 Page - Analog Devices

ADCMP603BCPZ-R7 датащи(HTML) 7 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

датащи скачать

ссылки URL