Area Light Specifications
®
Model LEDRA80X80
Red Area Light
Printed in USA
02/03
P/N 63220 rev. A
Area Light Features
•
Lightly diffused, strobed, area light for PresencePLUS™ sensors. See Banner’s
website at www.bannerengineering.com for a complete lighting tutorial.
•
Solid-state visible red LEDs
•
Direct connection to PresencePLUS sensors, using 3-pin Pico-style connector
(Do not connect to any other power source)
•Two available bracket options
Light source
Visible red LED, 660 nm
Connections
Operating conditions
Temperature: 0° to +50°C (+32° to 122°F)
Relative humidity: 90% at 50°C (non-condensing) max.
Illumination
Lightly diffused, high-intensity area light.
At a 12" distance the light illuminates a 4" diameter area that is within 50% of the center intensity.
Supply voltage and
current
Voltage supplied by P1B65Q, P2B65Q or select PresencePLUS sensors only (do not connect to any other power source).
Current: 300 mA max.
2 m (6.5') pigtail with 3-wire, 8 mm female Pico-style connector. Connect to select PresencePLUS sensors only.
Cleaning instructions
Regularly remove any dust, dirt, or fingerprints from the light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use any
other chemicals for cleaning.
110.4 mm
(4.35")
92.6 mm
(3.65")
46.2 mm
(1.81")
13.8 mm
(0.54")
94.0 mm
(3.70")
61.0 mm
(2.40")
15.8 mm
(0.62")
8.2 mm
(0.32")
4x M4 x 0.7
(7.1 mm Deep)
Figure 1. Model LEDRA80X80 area light dimensions
Construction
Low-carbon steel with black zinc plating, acrylic window
Useful Life
10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30% after 10,000
hours and less than 40% after 20,000 hours.
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
