www.marathonsp.com

4

PDS 0348 REV-H 12/19/17

Installation & Accessories

•

Mounting (Panel or DIN):

•

For use with #10 fastener.

•

Mounting torque to be determined in end use application not to exceed 30 lbf·in (3.4 N·m).

•

Din-Rail mountable on 7.5 X 35 mm rail.

•

When mounting blocks on Din rail, it is recommended to individually mount power blocks. Multi-line

configurations become increasingly difficult to mount as the line length increases.

•

Marker cards:

•

White plastic inserts: EPB Marker Card

•

Available drivers with part numbers are as follows:

•

Armstrong Ind. hand tools - #37-703 or #10-745

•

McMaster Carr - #5557A39 or #54875A46

Drawing