 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
SY88933ALKI датащи(PDF) 4 Page - Micrel Semiconductor |
|
|
|||||||||||||||||||||||||||||
SY88933ALKI датащи(HTML) 4 Page - Micrel Semiconductor |
|
|
4 / 9 page  Micrel, Inc. SY88933AL May 2005 4 M9999-051205 hbwhelp@micrel.com or (408) 955-1690 Absolute Maximum Ratings (1) Supply Voltage (VCC).................................. 0V to +7.0V Input Voltage (DIN, /DIN) ..................................0 to VCC Output Current (IOUT) Continuous..................................................... 50mA Surge ........................................................... 100mA EN Voltage ........................................................0 to VCC VREF Current .................................... –800µA to +500µA SDLVL Voltage ...............................................VREF to VCC Lead Temperature (soldering, 20sec.) ................ 260°C Storage Temperature (Ts) .................. –65°C to +150°C Operating Ratings (2) Supply Voltage (VCC)............................+3.0V to +3.6V Ambient Temperature (TA) ..................–40°C to +85°C Junction Temperature (TJ) ................–40°C to +120°C Junction Thermal Resistance MSOP (өJA) Still-air................................. 113°C/W DC Electrical Characteristics VCC = +3.0V to +3.6V; RLOAD = 50Ω to VCC–2V; TA = –40°C to +85°C; typical values at VCC = +3.3V, TA = +25 oC. Symbol Parameter Condition Min Typ Max Units ICC Power Supply Current No output load 26 39 mA SDLVL SDLVL Voltage VREF VCC V VOH PECL Output HIGH Voltage VCC-1.085 VCC-0.955 VCC-0.880 V VOL PECL Output LOW Voltage VCC-1.850 VCC-1.705 VCC-1.555 V VIHCMR Common Mode Range GND+2.0 VCC V VREF Reference Voltage VCC-1.48 VCC-1.32 VCC-1.16 V TTL DC Electrical Characteristics VCC = 3.0V to 3.6V; RLOAD = 50Ω to VCC-2V; TA = –40°C to +85°C. Symbol Parameter Condition Min Typ Max Units VIH EN Input HIGH Voltage 2.0 V VIL EN Input LOW Voltage 0.8 V IIH EN Input HIGH Current VIN = 2.7V VIN = VCC 20 100 µA µA IIL EN Input HIGH Current VIN = 0.5V -0.3 mA VOH SD Output HIGH Level VCC > 3.3V, IOH-MAX < 160uA VCC < 3.3V, IOH-MAX < 160uA 2.4 2.0 V V VOL SD Output LOW Level IOL = +2mA 0.5 V Notes: 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2. The data sheet limits are not guaranteed if the device is operated beyond the operating ratings. |
|
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
