RFKBES10EP datasheet(18/71 Pages) PANASONIC

18 / 71 page

9.3.

Service Modes

Service mode setting: While the power is off, press REC, CH UP and OPEN / CLOSE simultaneous ly for five seconds.

Item

FL display

Key operation

Mode name

Description

(Remote controller key)

Release Items

Item of Service Mode executing is cancelled.

Press [0] [0] or [Return] in service

mode.

Error Code Display

Last Error Code of U/H/F held by Timer is

displayed on FL.

*Details

are

described

“9.1.

Self-

Diagnosis Functions”.

Press [0] [1] in service mode

ROM Version Display

Region code, MAIN firm version, TIMER firm

version and DRIVE firmware versions are

displayed on FL for five seconds per each

version in order, but ROM version will be left

displayed.

‘’*’’ are version displays.

Press [0] [2] in service mode

White Picture Output

White picture is output as component Output

from AV Decoder.

*White picture

(Saturation rate : 100%)

*It is enable to switch Interlace/Progressive by

“I/P switch: [1] [4]”

*Initial mode is “Interlace”.

Press [1] [1] in service mode.

Switch Interlace/Progressive

Press [1] [4] in White Picture Output

mode.

*I/P are switched alternately.

Magenta Picture Output

Magenta picture is output with Component

Output from AV Decoder.

*Magenta picture

(Saturation rate: 100%)

*It is enable to switch Interlace/Progressive by

“I/P switch: [1] [4]”

*Initial mode is “Interlace”.

Press [1] [2] in service mode.

Switch Interlace/Progressive

Press [1] [4] in Magenta Picture

Output mode.

*I/P are switched alternately.

RTSC Return in XP

(A & V)

AV1 input signal is encoded (XP), decoded

(XP) and output decoded signal to external

without DISC recording and DISC playback.

Initial mode: EE2/ Interlace/ XP/

Audio 48kHz

Press [1] [3] in service mode.

Switch Interlace/Progressive

Press [1] [4] in RTSC Return XP

mode.

*I/P are switched alternately.

Audio 44.1 kHz/ 48 kHz Switch

Press [2] [4] in RTSC Return XP

mode.

*48 kHz / 44.1 kHz are switched

alternately.

I/P Switch

Switch Interlace and Progressive in EE mode.

*Initial setting is “Interlace”.

*This command is effective during executing

“White Picture Output”, “Magenta Picture

Output” and “RTSC Return in XP (A & V)”

modes.

Initial mode is Interlace

Switch Interlace/Progressive

Press [1] [4] in I/P Switch mode.

*I/P are switched alternately.

DMR-ES10EB / DMR-ES10EC / DMR-ES10EG / DMR-ES10EP / DMR-ES10EBL

RFKBES10EP датащи(PDF) 18 Page - Panasonic Semiconductor

RFKBES10EP датащи(HTML) 18 Page - Panasonic Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

датащи скачать

ссылки URL