IP-01 datasheet(59/92 Pages) ETC

59 / 92 page

300

42.5

Indicator light

Connector size M12

(29)

4.7

Most sensitive position

(15.2)

33.7

6.2

4.7

(29)

Most sensitive position

(15.2)

33.7

10.5

Most sensitive

position

Heat shrink tube Note)

Applicable to

300 mm

pre-wired connector

Note) A white color heat shrink

tube is attached to the

D-P3DWSE type only.

∗ When the auto switch is ordered on its own, the auto switch mounting bracket is not enclosed.

In that case, please order it separately.

Magnetic Field Resistance

Dimensions

If the current of the AC welding machine is

16000 A or lower, the auto switch can be used,

even if the distance between the welding

conductor (gun cable) and the cylinder/actuator

or auto switch is 0 mm.

Please contact SMC when the AC welding

current exceeds 16000 A.

Connector pin

(mm)

(g)

Weight

Auto switch model

Lead wire length (m) 0.3

D-P3DWSC D-P3DWSE

Body

Auto switch model

D-P3DWSC

D-P3DWSE

Sheath

Insulator

Conductor

Outside diameter [mm]

Number of cores

Outside diameter [mm]

Effective area [mm2]

Strand diameter [mm]

Minimum bending radius [mm] (Reference values)

ø4.8

2 cores

ø1.52

0.5

ø0.08

Oilproof Heavy-duty Lead Wire Specifications

RoHS

Magnetic Field Resistant

2-Color Indicator Solid State Auto Switch

D-P3DWSC/D-P3DWSE

(Electrical Entry: Pre-wired connector)

 It is possible to use in an

environment which generates

a magnetic field disturbance

(AC magnetic field).

 The proper operating range

can be determined by the

color of the light.

(Red

→ Green ← Red)

Precautions

Caution

For single-phase AC welding machines.

If it is used for current inverter welders

(including rectifying type) and condenser

type welders, the magnetic field resistance

is reduced. Please contact SMC regarding

the performance.

Auto Switch Specifications

PLC: Programmable Logic Controller

Auto switch model

Applicable load

Load voltage

Load current

Internal voltage drop

Leakage current

Operating time

Indicator light

Standard

24 VDC relay, PLC

24 VDC

6 to 40 mA or less

5 V or less

1 mA or less at 24 VDC

40 ms or less

CE marking, UL (CSA), RoHS

Operating range .......... Red LED illuminates.

Proper operating range .......... Green LED illuminates.

D-P3DWSC/E (With indicator light)

D-P3DWSC

D-P3DWSE

Refer to SMC website for the details of

the products conforming to the

international standards.

 Impact resistance — Switch: 1000 m/s2, Connector: 300 m/s2

 Insulation resistance — 50 MΩ or more (500 VDC measured via megohmmeter) (between lead wire and case)

 Withstand voltage — 1000 VAC for 1 minute (between lead wire and case)

 Ambient temperature — –10 to 60°C

 Enclosure — IEC60529 standard IP67

 Polarity: Non-polar

Auto switch mounting bracket

(For round groove mounting:

BQ6-032S)

Auto switch mounting bracket

(For square groove mounting:

BMG6-025S)

Model

Connector pin/Wiring

—

OUT(

±)

—

OUT( )

—

OUT(

±)

OUT( )

D-P3DWSC

D-P3DWSE

1632

IP-01 датащи(PDF) 59 Page - List of Unclassifed Manufacturers

IP-01 датащи(HTML) 59 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

датащи скачать

ссылки URL