Multi-Protocol MPR 7000 RFID Card

EPC Class 0/1 and 0+ in PCMCIA Type II Pkg.

Compact

Efficient

Low Cost

WJ Communications

401 River Oaks Parkway, San Jose, CA 95134

WWW.WJ.COM

Product Features

Serial Interface Using 68-Pin PCMCIA Connector

Multi Protocol

•

EPC Class 0 (read)

•

EPC Class 1 (read and program)

•

Class 0+ (read and program)

•

Firmware Upgrade (UHF G2 & others)

Multiple Antenna Ports

•

Two Separate Antennas

•

50 Ohm MMCX Coax Connectors

PCMCIA Type II PC Card™ Physical Package

FCC Approved—FCC ID: NTTWJMPR7XXX

Just plug it in, install it and read tags...

WJ’s MPR 7000 RFID Card provides breakthrough performance in a

standard PCMCIA Type II package. These readers represent a new level

for size, standards-based compatibility, ease of use and performance.

Each RFID Card includes the analog RF, digital circuitry and embedded

firmware required for EPC Class 0 and EPC Class 1 operation. The

modular design is flexible, and a simple firmware upgrade is all that is

required to incorporate future standards—like UHF Gen 2—and new

features.

The MPR 7000 leverages the common PCMCIA Type II

package

with

serial

communications

and

separate

bias

power

connections.

Plug it into a PCMCIA Type II socket wired for serial

communications and operate it via a simple WJ GUI program. WJ’s

simple but powerful command set allows for fast creation of custom

applications via an open-source DLL. These readers enable a host of

reader and programmer solutions including handhelds, printers, smart

packaging, material handling and industrial products for today and the

future.