Multi-Protocol MPR 6000 RFID Card

EPC Class 0/1 and 0+ in PCMCIA Type II Pkg.

Compact

Efficient

Low Cost

WJ Communications

401 River Oaks Parkway, San Jose, CA 95134

WWW.WJ.COM

WJ’s MPR 6000 RFID Card provides breakthrough performance in a

standard PCMCIA Type II package. These readers represent a new level

for size, standards-based compatibility, ease of use and performance.

Each RFID Card includes the analog RF, digital circuitry and embedded

firmware required for EPC Class 0 and EPC Class 1 operation. The

modular design is flexible, and a simple firmware upgrade is all that is re-

quired to incorporate future standards like UHF Gen 2. The MPR 6000

leverages the common PCMCIA Type II PC Card™ standard for ease of

use. Plug it into any PCMCIA Type II socket and operate it via a simple

WJ GUI program. The standard PCMCIA control interface (68-pin paral-

lel bus) coupled with a simple but powerful command set allows for fast

creation of custom applications.

These readers enable a host of

reader/programmer

solutions

including

handhelds,

printers,

smart

packaging, material handling and industrial products for today and the

future.

Product Features

Standard 68-Pin PCMCIA Type II PC Card™

Multi Protocol

•

EPC Class 0 (read only)

•

EPC Class 1 (read and program)

•

Class 0+ (read and program)

•

Firmware Upgrade (UHF G2 & others)

Multiple Antenna Ports

•

Two Separate Antennas

•

50 Ohm MMCX Coax Connectors

Certified Compliance to FCC Part 15

•

FCC ID: NTTWJMPR6XXX

Just plug it in, install it and read tags...