3

ICS9169-01

Absolute Maximum Ratings

.

Electrical Characteristics at 3.3 V

Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings are stess

specifications only and functional operation of the device at these or any other conditions above those listed in the operational

sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect

product reliability.

Stresses a

stess spec

operation

periods m

Supply Voltage .................................................................................................................................................................. 7.0 V

Logic Inputs ............................................................................................................................ GND - 0.5 V to VDD + 0.5 V

Ambient Operating Temperature ........................................................................................................................... 0 to +70 C

Storage Temperature ......................................................................................................................................... -65 to +150 C

VDD = 3.0 - 3.7 V, TA = 0 - 70

oC unless otherwise stated

Note 1: Parameter is guaranteed by design and characterization. Not 100% tested in production.

DC Characteristics

PARAMETER

SYMBOL

TEST CONDITIONS

MIN

TYP

MAX

UNITS

Input Low Voltage

VIL

--

0.2VDD

V

Input High Voltage

VIH

0.7VDD

--

V

Input Low Current

IIL

V

IN = 0 V

-28.0

-10.5

-

µA

Input High Current

IIH

VIN = VDD

-5.0

-

5.0

µA

Output Low Current1

IOL

VOL = 0.8 V;

for PCLKs & BCLKs

30.0

47.0

-

mA

Output High Current1

IOH

VOL = 2.0 V; for

PCLKs & BCLKs

-

-66.0

-42.0

mA

Output Low Current1

IOL

VOL=0.8V; for fixed CLKs

25.0

38.0

-

mA

Output High Current1

IOH

VOL=2.0V; for fixed CLKs

-

-47.0

-30.0

mA

Output Low Voltage1

VOL

IOL = 15 mA; for PCLKs & BCLKs

-

0.3

0.4

V

Output High Voltage1

VOH

IOH = -30 mA;

for PCLKs & BCLKs

2.4

2.8

-

V

Output Low Voltage1

VOL

IOL=12.5mA; for fixed CLKs

-

0.3

0.4

V

Output High Voltage1

VOH

IOH = -20mA;

for fixed CLKs

2.4

2.8

-

V

Supply Current

IDD

@ 66.5 MHz; all outputs unloaded

-

55

110

mA