3

Technical Data ELX1217

Effective August 2022

AMH

Automotive bolt in fuse

www.eaton.com/electronics

General specifications

Item

Standrd/Specification

Conditions

Acceptable value/range

Operating temperature

-40 °C to +105 °C with proper derating

Strength of terminals

JASO D622

ISO8820-8

mounting torque 12+/-1 Nm, 3 times

Resistance

change <10%

Temperature rise

JASO D622

ISO8820-8

0.5 In, 40 min

not exceed 50 K

Temperature humidity

cycling

JASO D622

ISO8820-8

a)

maintain the samples at standard conditions for 4 h;

b)

increase T to 55+/-2 °C at 95% to 99% RH within 0.5 h;

c)

maintain T at 55+/-2 °C at 95% to 99% RH for 10 h;

d)

decrease T to -40+/-2 °C within 2.5 h; the humidity is uncontrolled;

e)

maintain T at -40+/-2 °C for 2 h; the humidity is uncontrolled;

f)

increase T to 120+/-2 °C within 1.5 h from -40+/-2 °C; the humidity

is uncontrolled;

g)

maintain T at 120+/-2 °C for 2 h; the humidity is uncontrolled;

h)

allow to return to RT within 1.5 h; the humidity is uncontrolled;

10 cycles.

Resistance change <10%,

electrical performance within

spec

Thermal shock

JASO D622

ISO8820-8

(reference)

a)

-40+/-2 °C, 20 min;

b)

15 sec dwell time;

c)

125+/-2 °C, 20 min;

d)

15 sec dwell time; 48 cycles.

Resistance change <10%,

electrical performance within

spec

Vibration

UL248-20

IEC 60068-2-64

Random vibration. Condition C: rms 30.2 m/s2, 3 directions, 8 hrs each.

Resistance change <10%,

electrical performance within

spec

Transient current cycling

JASO D622

ISO8820-8

(reference)

23+/-5 °C, each cycle current 2 In/0.25 sec, 0.5 In/5 sec, 50000 cycles.

Resistance change <10%,

electrical performance within

spec

Lubricant & fuel

oil resistance

GB/T31465.1-5.4

Wipe the marking with lubricant or oil 30 s

Marking can be identified

Breaking capacity

Follow the spec

IR > 0.1 Mohm, no explosion